Subject: (no subject)
Author: 3haw-@bluefrog.biz
Date: Mar 26, 2003, 6:13 PM
Post ID: 1712396287
This is a multi-part message in MIME format.
------=_NextPart_000_000E_01C2F3DC.2E587920
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
Gentlemen,
I am back, thanks to Charlie. Hope all of you are well.
I have an opening problem, of course. Last year my 69 Ambo ran pretty well but she never idled that well so over the winter I cleaned and rebuilt the carbs. Reinstalled everything. Now, the bike starts well but she idles way too fast, up near 2000 rpms. I have tried the two screws on the sides of the carbs at factory specs, above and below factory specs. Even screwed the srews into the carbs all the way but she still runs real fast. Friend told me I have an air leak somewhere between the carb and head and to spray ether which I did but there was no accleration noticable. Took all the cables off the carbs and buttoned them back up and she still ran fast, with no cables! Any suggestions out there. Thanks, and again nice to be back.
Bob Hawkes
------=_NextPart_000_000E_01C2F3DC.2E587920
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><STRONG><FONT color=#000080 size=4>Gentlemen,</FONT></STRONG></DIV>
<DIV><STRONG><FONT color=#000080 size=4>I am back, thanks to Charlie. Hope
all of you are well.</FONT></STRONG></DIV>
<DIV><STRONG><FONT color=#000080 size=4></FONT></STRONG> </DIV>
<DIV><STRONG><FONT color=#000080 size=4>I have an opening problem, of
course. Last year my 69 Ambo ran pretty well but she never idled that well
so over the winter I cleaned and rebuilt the carbs. Reinstalled
everything. Now, the bike starts well but she idles way too fast, up near
2000 rpms. I have tried the two screws on the sides of the carbs at
factory specs, above and below factory specs. Even screwed the srews into
the carbs all the way but she still runs real fast. Friend told me I have an air
leak somewhere between the carb and head and to spray ether which I did but
there was no accleration noticable. Took all the cables off the carbs and
buttoned them back up and she still ran fast, with no cables! Any
suggestions out there. Thanks, and again nice to be
back. </FONT></STRONG></DIV>
<DIV><STRONG><FONT color=#000080 size=4>Bob
Hawkes</FONT></STRONG></DIV>
</BODY></HTML>
------=_NextPart_000_000E_01C2F3DC.2E587920--