Topica Loopframe_Guzzi Archive
 

Subject: (no subject)

Author: Keith Ruff

Date: Aug 7, 2000, 5:44 AM

Post ID: 1701770798

Hello again, another question,

I have steel saddle bags on my 71 LAPD Ambo, and the rear blinkers are
mounted to a bracket that is welded onto on these bags. I took the
blinkers off the bags to clean them up and also re-paint the bags, and
planned on mounting them to the license plate bracket, back to the
original location. Problem I ran into is that the blinkers are mounted
to the bags with 2 allen screws instead of the one center bolt needed to
mount them to the license plate bracket. Mark (guzzirenew) told me my
blinkers are probably Harley type, and that Napa should have the
blinkers I need to mount to the license plate bracket. Will check with
them, but also thought I would ask if any of you fellow Loopers have and
can sell me a set of 2 wire rear blinkers (with BIG Red lense) with the
center bolt for proper mounting to the license plate frame.

Thanx!

Keith Ruff
71 LAPD Amabassador - NJ

Entire thread: