clear silicon adhesive/sealer. much better. excess can be wiped away with a finger. and you can barely see any excess anyow.
pull the battery. undo the two bottom bolts on the air cleaner and just loosent eh top bolt. then you can use your finger to goo the lip of the boot then swing the cleaner housing back into place and bingo.
From: Tom Bowes <kk-@home.com> Reply-To: Loopfram-@topica.com To: Loopfram-@topica.com Subject: RE: ORIGINAL LOOP AIR CLEANER Date: Sat, 15 Dec 2001 14:46:49 +0000
============================================================ Win a FREE Family Vacation! To your favorite drive-to vacation spot from Bid4Vacations Condos 7 days for $299, Cruises - bids start at $1 http://click.topica.com/caaaeE5b1dfltb2c9oVa/Bid4Vacations ============================================================
Bob,
There is another alternative that you might want to consider. Gary Cheek and I have glued the rubber air boot on our bikes to the airbox using weatherstrip adhesive, and so far it is working quite well. The biggest tricks were getting everything in position prior to applying the glue, and getting the boot and airbox squeeky clean for the adhesive. I had a new boot and a freshly powder coated airbox to work with, so I just installed the boot, trial fitted the airbox, and cleaned their mating surfaces with solvent alcohol. The extra glue was removed with a bit of naptha (handwarmer fluid).
I thought about the inner sleeve trick myself, let us know how it works if your decide to go that way.
Tom
'70 (July '69) Ambassador '82 V50-III Shelby Township, Michigan
Robert Hawkes wrote:
Gentlemen, Currently I have the traditional air cleaner system on my Ambo. , the round air filter, inside the metal air box, loosely connected to the rubber sleeve going to the carbs. The rubber thingy is connected with duct tape. Not a good situation. What I want to do is fix the weak spot in this system which is the loosely connected rubber sleeve to the metal air box. I want to make a metal collar that attaches to the inside of the metal air box and extends out and into the rubber sleeve so that I can put a large hose clamp around the rubber sleeve and cinch it down onto this new extension. Does this make sense? I'd rather not throw out the original air box and put on modern filters. Thanks, Bob
============================================================ Improve Your Site's Conversion with Keywords by RealNames! Keyword users convert at TWO times industry averages. Register a Keyword now and get FREE REPORTING: http://click.topica.com/caaaeVEb1dfltb2c9oVf/RealNames ============================================================
Scotch - Because one doesn't solve the world's problems over white wine.