Subject: Re: EX. Leaks

Hi Gary...I'd be interested in both tools.....

I know it's probably been mentioned but it's VERY important to use the
frame/exhaust clamps to keep the threads from wearing out.....

Mike
www.classicguzzi.com

----- Original Message -----
From: "Gary Cheek" <kg8-@home.com>
To: <Loopfram-@topica.com>
Sent: Wednesday, October 24, 2001 2:38 PM
Subject: RE: EX. Leaks

---------------- Sprint 7" AnyTime(sm) Online ----------------
Order online and save online! You can save up to $5.95
every month and enjoy 7" long distance 24/7. Introducing
Sprint 7" AnyTime(sm) Online, a new calling plan for price-
savvy callers:
http://click.topica.com/caaadw3b1dfltb2pRbDa/Sprint
-------------------------------------------------------------------

From what it sounds like everyone is using maybe it is time I make a
batch of the proper dog type spanners. The "hook type are a bit better
than the Chanellock/pipe wrench/hammer chisel hackersaw etc. The dog
type spanner uses 2 flat dog keys 180 degrees apart to give a more
tangental drive without crushing the nut as the others do. I made a
similar tool for Tom Bowes to use on his fork tubes and have been
thinking of making a batch of them too.
Let me know how much interest there is,the price will be reasonable .

PS , Permatex high temp anti sieze compound is the best thing to use on
the threads, If threads are worn, a few layers of Teflon pipe tape
wrapped CLOCKWISE from the end of the nut can buy you a lot of time. It
takes up extra clearance and cushions the threads from further wear.

Kevin Graf wrote:

Thanks, I found some that look like they would work on the website.

"I checked my nuts (ahem) at each fuel stop"

There's a T-shirt there somewhere.

-----Original Message-----
From: Zerhackermann . [mailto:chopp-@hotmail.com]
Sent: Wednesday, October 24, 2001 1:36 PM
To: Loopfram-@topica.com
Subject: RE: EX. Leaks

---------------- Sprint 7" AnyTime(sm) Online ----------------
Order online and save online! You can save up to $5.95
every month and enjoy 7" long distance 24/7. Introducing
Sprint 7" AnyTime(sm) Online, a new calling plan for price-
savvy callers:
http://click.topica.com/caaadw3b1dfltb2D1Vxa/Sprint
-------------------------------------------------------------------

It's like a set of 3 wee, not so wee and friggin huge.
they have a hinge in the middle so that they can fit a variety of
diameters,
the hook is 1/8-1/4" wide as opposed to the shock adjustors 16 guage
pressed
steel. AND they have a neoprene handle. I wrapped mine ina towel and
stuck
it in my tool box. I checked my nuts (ahem) at each fuel stop

From: Kevin Graf <kgr-@midwestpension.com>
Reply-To: Loopfram-@topica.com
To: Loopfram-@topica.com
Subject: RE: EX. Leaks
Date: Wed, 24 Oct 2001 12:00:08 -0400

============================================================
Do you know what's on your credit report?
Find out with a FREE Equifax credit report & FREE
CreditCheck Monitoring Service trial! Plus, get valuable
tools and tips for improving your credit rating. Try it
FREE today!
http://click.topica.com/caaadTPb1dfltb2c9oVa/CreditCheck
============================================================

I'll have to look into that sounds allot better than that stupid V-Twin
shock adjuster that barely fits right. Are the wrenches sized?

-----Original Message-----
From: Zerhackermann . [mailto:chopp-@hotmail.com]
Sent: Wednesday, October 24, 2001 11:46 AM
To: Loopfram-@topica.com
Subject: Re: EX. Leaks

============================================================
Upgrade your server! Get VeriSign's FREE guide, "Securing
Your Web Site for Business" for everything you need to know
about using 128-bit SSL to encrypt your e-commerce
transactions online security. Click here!
http://click.topica.com/caaadV7b1dfltb2D1Vxa/VeriSign
============================================================

I think I have a set of your old exhaust nuts. Ugly.
Harbor freight sels a set of hook wrenches for 8 bux that work
perfectly,
don't slip and they don't trash your nuts (har)

From: Bruce Giller <bgil-@mitre.org>
Reply-To: Loopfram-@topica.com
To: Loopfram-@topica.com
Subject: Re: EX. Leaks
Date: Wed, 24 Oct 2001 11:12:35 -0400

============================================================
FREE Credit Report!
Get your FREE credit report and take advantage of true
credit expertise with a FREE CreditCheck Monitoring Service
trial! It's your key to getting on top of your credit
situation and staying there. Get yours now!
http://click.topica.com/caaadRYb1dfltb2c9oVa/CreditCheck
============================================================

My Weapon of Choice is a chain-Visegrip to tighten/remove the

exhaust

nuts. This all-purpose tool will grab just about any round object

and

hold it still. Using it on the exhaust nuts, you need to carefully
place the chain for the clearances between the nut and the cylinder

head

can get tight and you don't want the chain scraping the head. I also
use it (with adequate protection) to disassemble the front forks.

Bruce

'72 Eldo

Ian Adkins wrote:

Ed,

I can't really remember exactly. I think that a BIG pipe wrench

was

used....some penetrating oil......lots of pulling and I think the

nut

finally collapsed in on itself and the nut came out that way. In

hind

site

that was likely a pretty stupid thing to do since I risked

damaging

the

threads in the head. Turns out that the only thing that was

destroyed

was

the nut.....I was lucky. You might try heating the nut too.

Is this the new "old" girl you are working on? Did you get the

bike

ok?

I'm

looking forward to meeting you and seeing the bike in the New

Year.

Regards....Ian

-----Original Message-----
From: Edward Flanagan <flan-@edwardsbaking.com>
To: 'Loopfram-@topica.com' <Loopfram-@topica.com>
Date: October 24, 2001 10:38 AM
Subject: RE: EX. Leaks

Ian, how did you finally get the header nut loose. I have one

that I

have

almost destroyed and can't seem to get loose.

Thanks, Ed

============================================================
Do you know what's on your credit report?
Find out with a FREE Equifax credit report & FREE
CreditCheck Monitoring Service trial! Plus, get valuable
tools and tips for improving your credit rating. Try it
FREE today!
http://click.topica.com/caaadTPb1dfltb2c9oVf/CreditCheck
============================================================

_________________________________________________________________
Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp

============================================================
FREE Credit Report!
Get your FREE credit report and take advantage of true
credit expertise with a FREE CreditCheck Monitoring Service
trial! It's your key to getting on top of your credit
situation and staying there. Get yours now!
http://click.topica.com/caaadTQb1dfltb2D1Vxf/CreditCheck
============================================================

============================================================
Get a FREE Credit Report with a FREE CreditCheck Monitoring
Service trial! CreditCheck gives you the tools to approach
your lender with confidence, so don't delay - get yours
today!
http://click.topica.com/caaadHxb1dfltb2c9oVf/CreditCheck
============================================================

============================================================
Get a FREE Credit Report with a FREE CreditCheck Monitoring
Service trial! CreditCheck gives you the tools to approach
your lender with confidence, so don't delay - get yours
today!
http://click.topica.com/caaadTSb1dfltb2pRbDf/CreditCheck
============================================================

Subject: Re: EX. Leaks

Author: EldoMike

Date: Oct 24, 2001, 12:50 PM

Post ID: 1708687632

Entire thread: