Topica Loopframe_Guzzi Archive


Subject: Re: 67 V700 update in Fl

Author: Ian Adkins

Date: Jan 16, 2001, 7:49 AM

Post ID: 1704940147


I was wondering whether the jets could remain clogged even after the
numerous cleanings that Rick gave? I was also thinking that possibly the
problem is a worn slide.

No doubt that I will continue to have sleeping problems till this issue is
resolved :-)

Regards...Ian


-----Original Message-----
From: jason telford <jr-@avalon.net>
To: Loopfram-@topica.com <Loopfram-@topica.com>
Date: January 16, 2001 10:31 AM
Subject: RE: 67 V700 update in Fl


 
Congratulations on the longest running thread yet (I think)

My .02 sez its the carbs. My eldo was running the same way when I got it,
popping, poor idle, overly rich, ran better with the choke, etc. The only
difference is that I have amals on mine. I rebuilt them (including
replacing the slides), and found that on the 'popping' side that the idle
jet was clogged, and therefore the main was used to compensate. That
little passage was a real bugger to clean out, but now the bike runs like a
champ! No popping even though I have the ez-flo-thru pipes. Of course,
they're amals so...well, they're amals.

Cheers,
Jason

Entire thread: