Subject: Re: oil pressure
Author: John Chicoine
Date: May 11, 2005, 7:02 AM
Post ID: 1718846517
I had a simlar experience with my 76 KZ900 in the early 80's. After
installing an oil pressure gage I was shocked to see the oil pressure fall
to nothing at idle. I went out an bought a new oil pump for $80 and it did
nothing to change the pressure!
Watch the road not the pressure gage, or you may have real problems!!!!!!!
:)
John C.
----- Original Message -----
From: "joe jump" <jum-@hotmail.com>
To: <Loopfram-@topica.com>
Sent: Wednesday, May 11, 2005 9:34 AM
Subject: RE: oil pressure
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to
reduce wrinkles by 68% Click here to get your 30-day free supply.
http://click.topica.com/caadslIb1dfltbN7eKTa/Nexiderm
-------------------------------------------------------------------
Greg,
I would say those oil pressure numbers are excellent, even for a
machine with half the mileage as yours. The thing your engine really
needs is a constant flow of oil to the bearings. The pressure doesn't
float the bearing off the journal; the film strength is what prevents
metal-to-metal contact. A pressure indication proves that you have an
oil supply to the bearing - the oil does the rest.
I installed a pressure gage on my Commando 20k miles ago during
the rebuild (both top & bottom end). I worried terribly when I noticed
the oil pressure would drop from 70 psi at cold idle to under 10 psi
when hot at 4000 rpm, and go close to zero at extended riding above 4500
rpm. This was with straight 50 wt racing Valvoline or 20-50 Castrol -
made no difference. I did everything I could - checked & replaced seals,
orifaced (sp?) the rocker feed banjo bolts, blueprinted the oil pump,
messed with the pressure relief valve; nothing worked. I finally wrote
to the Intl. Norton Owners Assn. tech advisor (Brian Slark) who used to
be a a factory rider. He told me to take off the gage and ride it - they
all did that. In fact, when Norton started producing the twin, they came
with an oil pressure gage mounted in the tank, but they soon removed it
because of all the hand-wringing it caused when owners saw their oil
pressure go to nada. Brian was right - 20K & no problems. Your oil
pressure sounds great!
Joe in St Louis
850T-Powered Ambo
"Junkyard"
Greg Bender wrote:
I successfully installed the oil pressure gauge this evening and went for a 25 minute ride to see what would happen when the oil warmed up fully. |
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 75% on luxury bed & bath! Luxury sheets, duvets,
down comforters, plush towels & more woven from the finest
materials -- 400, 600, 1000 thread count & more from $29.99!
http://click.topica.com/caadt4Ab1dfltbN7eKTf/SmartBargains
-------------------------------------------------------------------