Subject: Re: con rods
Author: Joe Edmonson
Date: Sep 13, 2004, 5:20 PM
Post ID: 1717523196
If I'm not mistaken the 850 block has additional webbing to handle the extra
load of the bigger CC's. I'm not an expert but would the V700 block handle
the 850 jugs and crank?
Joe Edmonson
----- Original Message -----
From: "Greg Bender" <gr-@thisoldtractor.com>
To: <Loopfram-@topica.com>
Sent: Monday, September 13, 2004 7:55 PM
Subject: RE: con rods
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Are Americans getting fat? Give us your opinion and win.
http://click.topica.com/caacDvYb1dfltb7b5Noa/PermissionData
-------------------------------------------------------------------
Thanks for correcting me, David...I wondered where the stroke difference
was made up - makes sense now that I think about it.
David J. Otis wrote:
conn rods are all the same 700/750/850 700/750 cranks are the same, 850 crank has longer stroke, the stroke difference is compensated for in the pistons. Greg Bender wrote:
|
Regards,
Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and walk away with your free Chevy collectible.
http://click.topica.com/caacDvMb1dfltb7b5Nof/PermissionData
-------------------------------------------------------------------