Subject: RE: Buffing Aluminum - Part 2
Author: Custom Guzzi
Date: Nov 8, 2003, 8:09 PM
Post ID: 1715152114
I used to use it on the toes of my boots in the Army for inspections. It
made them look like a mirror. :)
Paul
Midlothian, Va
73 Eldo "Elvira" at a halt in favor of "Daisy"
74 Eldo "Daisy" new project
Prusnek wrote:
I've used it on mainly rims and cowlings and such. I 've used it on a
primary case and it seemed to be ok. You just wipe it on real thin and
that's it, you really don't see it, My feeling is that it may soak in
and seal the aluminum a few microns on the surface, preventing oxygen
from getting to the aluminum.
John Prusnekdoes future floor polish leave a residue that heat will affect?
----- Original Message -----
From: John Prusnek
To: Loopfram-@topica.com
Sent: Friday, November 07, 2003 9:39 AM
Subject: Buffing Aluminum - Part 2
I've used Future floor polish with great success, seems to stop the
oxidation and doesn't yellow or peel or anything. Just takes a little
bit.
If you search around this website, there's an online booklet on how to
buff and polish aluminum:
http://www.caswellplating.com/index.html
John Prusnek