Subject: RE: Carbs???
Author: Hunter Jones
Date: Feb 12, 2003, 1:52 PM
Post ID: 1711930695
Howdy Karl,
I've got a pair of 36's that I am going to put on the Eldo, most likely.
I have the intake stubs from a 850 Lemans and the rubber elbows from the SP
1000. The rubber may be from the II series. Anyway, this turns the carbs in
enough to use the proper sidecovers and should run pretty well.
I may have to get another set as these manifold goodies have gone to use on
the fuelie setup for my Ambassador. I'll have to let ya know how that works
out.
Hunter
At 09:06 AM 2/12/2003 -0500, you wrote:
| I am just guessing but the way ducati's are set up with their V configuration I believe the carb adjustments are on the same side but most of the Ducatis I have seen had pinch clamps vs the rubber boot set up. Being 40mm I would say they are from a duck vs a guzzi, since the 40's were only used on the early LeMans as a special option from what I have read, so there are not many around. I mounted some round slide rubber mount 32 delloto's on my eldo and had some clearance problems with the side covers using the stock rubber boot intakes. I am probably going to end up making some custom intakes for it as the stock eldo intakes are to small to clamp the carb boot on. For now I have taken a set of 74 amal intakes and milled the carb mounts round so the boot can clamp to it. The problem I found with this set up is it spaces the carb back a ways and it effects the mid rage throttle. Karl and Jane Kologiski MGNOC Central Florida Reps Bird at The Wheel, Motorcycle Arts St. Petersburg Florida Visit our Website athttp://home1.gte.net/janemac/bird.html -----Original Message----- From: Jtomel-@aol.com [SMTP:Jtomel-@aol.com] Sent: Wednesday, February 12, 2003 5:17 AM To: Loopfram-@topica.com Subject: Re: Carbs??? Don't know how to tell. they have what look like KN filters and I would guess, clamp on rubber boot type mounts. Maybe you can tell me how to tell. Tom '78 SP1000 rider ''74 Eldo front disc model '67 V700 no tank no shift or brake linkage or rear drive or front fender or heads '77 Convert << File: ATT00003.htm >> |