Subject: RE: Carbs???
Author: Karl Kologiski
Date: Feb 11, 2003, 4:30 PM
Post ID: 1711924111
Sounds like they were from a Ducati. Do they have the rubber boot mount or clamp mount like the old square barrels ?
Karl and Jane Kologiski
MGNOC Central Florida Reps
Bird at The Wheel, Motorcycle Arts
St. Petersburg Florida
Visit our Website athttp://home1.gte.net/janemac/bird.html
-----Original Message-----
From: Jtomel-@aol.com [SMTP:Jtomel-@aol.com]
Sent: Tuesday, February 11, 2003 2:38 PM
To: Loopfram-@topica.com
Subject: Carbs???
Bought a pair of 40 mm round slide Dellortos for my Eldo off Ebay and when I
got them I discovered they are set up for a wrong angle v-twin (both sets of
adjusting screws are on the same side). Is this a something a machine shop
can do, or do I need to find a specialist in carb work? Seems to me it
should be fairly straight forward, but not sure. Reason for the big carbs is
88mm sleeves and pistons and bigger valve heads. My goal is a nice looking
bike like Freds and lots of power.
Any suggestions will be greatly appreciated. TIA
Tom
'78 SP1000 rider
''74 Eldo front disc model
'67 V700 no tank no shift or brake linkage or rear drive or front fender or
heads
'77 Convert
<< File: ATT00003.htm >>