Subject: RE: Replating
Author: Karl Kologiski
Date: Feb 7, 2001, 6:22 PM
Post ID: 1705330528
I bought a set of new crash bars that were from Germany and within 4 months
they were rusting up. I had a good coat of polish on them, but with the
humidity here in Florida it is hard to fight rust. The plating on them
must have been Chrome Flashing instead of true Chrome Plating for them to
rust up that fast. The EPA has really cracked down on platers within the
past few years. They use some nasty chemicals. Allot of car club guy here
in the area send their stuff to Canada to get chromed. I guess they can
still get away using the good stuff up there.
Jane & Karl Kologiski
Bird at the Wheel - Motorcycle Arts-
St. Petersburg, Florida
Visit our web site at
http://home1.gte.net/janemac/bird.html
-----Original Message-----
From: Guzzi-@aol.com [SMTP:Guzzi-@aol.com]
Sent: Wednesday, February 07, 2001 12:02 AM
To: Loopfram-@topica.com
Subject: Re: Replating
--- Sponsor's Message --------------------------------------
Who Are the Dot-Com Dogs?
Find out who's getting funding and who's getting laid off!
http://click.topica.com/aaaa4ub1dfltb1BgZXa/winnerslosers
------------------------------------------------------------
I pay about $40 each.Have been doing alot of busniess with same chrome
shop.I
do $300,$400 batches about every 6 weeks,so my cost should be lower than
the
person off the street with a one time job.Usally the rechrome job is better
than the new ones.Mark.Moto Guzzi Classics
------------------------------------------------------------
<*><*> Totally FREE software. Just pay shipping! <*><*>
Click here --->>http://www.daytips.com/ads/freecd.html
<a href="http://daytips.com/ads/freecd.html">AOL Link</a>
____________________________________________________________
T O P I C A -- Learn More. Surf Less.
Newsletters, Tips and Discussions on Topics You Choose.
http://www.topica.com/partner/tag01