Subject: Re: Eldo rear drive question
Author: Ted Ward
Date: Apr 25, 2005, 11:46 AM
Post ID: 1718757846
Thanks Greg and Rob. So does that mean to drain the read drive I have to
remove the 6 hex head bolts on the bottom of the thing that looks like a
heat diffuser?
----- Original Message -----
Hi Ted,
The rearward facing plug is the "level" plug.
With bike in gear on the centerstand, it is normal to hear some clunking
as there isn't any load on the rear wheel to keep all of the pieces
pressed up against one another. It isn't a good thing to idle it on the
centerstand in gear for extended periods of time...the lack of a load
and the clunking will reduce the life of the drive train components. A
little bit for diagnostic purposes, is just fine, IMHO.
Ted Ward wrote:
Is the nut on the back of the drive a level or a drain? With my bike up on its centerstand and the bike in gear idling, the rear drive makes some "clunky" noises. Has anyone else notice if that is normal or not? |
Regards,
Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender
Florida MGNOC website
http://www.thisoldtractor.com/fl_mgnoc
Minnesota MGNOC website
http://www.thisoldtractor.com/mn_mgnoc
==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay! Click now!
http://click.topica.com/caaa9eYb1dfltbNPab1f/TopOffers
==========================================================