Subject: RE: clutch question....
Author: Jason Telford
Date: Feb 28, 2005, 11:32 AM
Post ID: 1718468655
Ray Hale wrote:
Jason, do you use the stock clutch pushrod and all associated parts from that point back to the lever? Ray |
Yes. Use your old pushrod, etc. I 'crabbed' the transmission out of the
frame and left the motor in. I removed the clutch lever to do this, and
probably the hardest part was jockeying the transmission/pushrod back
and forth getting it out of the frame. And if that's the hardest part,
then that tells you how easy the job was.
If you ordered from MGCycle, you got the same thing I got. It will have
the clutch/flywheel assembly, 6 bolts, one input hub. I bought a new
input hub washer and nut as well.
If you want pictures- I've got pictures. Give me a couple minutes to see
what I can put up on a webpage.
Jason