Subject: Re: VHB 29 rebuild
Author: STEVE FARRIS
Date: Feb 7, 2005, 6:36 AM
Post ID: 1718347520
This is a multi-part message in MIME format.
------=_NextPart_000_002B_01C50CE7.300B41F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
bob c.,
what paul said about the kits. the kits have all the o rings and gaskets you need and more.
Steve
71 Ambo (about to go under the knife)
72 Eldo (almost ready to roll)
----- Original Message -----
From: Custom Guzzi
To: Loopfram-@topica.com
Sent: Monday, February 07, 2005 5:58 AM
Subject: RE: VHB 29 rebuild
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a FREE* Portable Satellite Radio - yours to keep! Click Here!
http://click.topica.com/caac8uyb1dfltbN3z84a/PortableSatellite Radio Promotion
-------------------------------------------------------------------
MG Cycle has the kits.
Paul
73 Eldo "Elvira" 949 conversion
74 Eldo "Daisy" undergoing a full police restoration
-----Original Message-----
From: BOB COLLETT [mailto:coll-@rjrt.com]
Sent: Monday, February 07, 2005 7:07 AM
To: Loopfram-@topica.com
Subject: RE: VHB 29 rebuild
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caac8usb1dfltb6GIoLa/ProductTestPanel
-------------------------------------------------------------------
Where did you gusy get your VHB carb rebuild kits? Was it a complete,
don't need anything else type kit? I've got 2 VHB 30's I need to rebuild
and replace the AMALS I'm running. No problems with the AMALS just want
to try the Del's.
Thanks
Bob
STEVE FARRIS wrote:
> Messagethanks paul,
> that's exactly what I've put on so far so I hope I'm "good to go"
> gonna
> go get some fresh gas and give it a try tonight.
> steve
> ----- Original Message -----
> From: Custom Guzzi
> To: Loopfram-@topica.com
> Sent: Saturday, February 05, 2005 3:42 PM
> Subject: RE: VHB 29 rebuild
>
>
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> Get a FREE* Portable Satellite Radio - yours to keep! Click Here!
>http://click.topica.com/caac8uyb1dfltbN3z84b/PortableSatellite Radio
> Promotion
> -------------------------------------------------------------------
> Ok, then toss the mini fiber washer and mount your carbs. Never
> installed one anywhere inside the carb ever. Paper gasket on top, big
> o-ring on bowl, fiber washer on bowl nut, o-ring on enrichener jet and
> o-ring on enrichener plunger cap. That's about it if I remember right.
>
>
> Paul
> 73 Eldo "Elvira" 949 conversion
> 74 Eldo "Daisy" undergoing a full police restoration
> -----Original Message-----
> From: Steve Farris [mailto:nmwi-@msn.com]
> Sent: Saturday, February 05, 2005 4:45 PM
> To: Loopfram-@topica.com
> Subject: Re: VHB 29 rebuild
>
>
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> 2-Day Tax Refund Loans TaxBrain Online Tax Service Get Started
> Now!
>http://click.topica.com/caac8vhb1dfltb6GIoLb/TaxBrain
> -------------------------------------------------------------------
> Paul,
> thanks you are correct I didn't mention the fiber washer on the fuel
> banjo.
> but that's not the one I'm concerned about. the fuel inlet washer is
> about 10-12mm OD the fiber washer I'm wondering about is the smallest
> one, about 4 or 5mm OD with about a 3mm ID.
> thanks
> steve
> ----- Original Message -----
> From: Custom Guzzi
> To: Loopfram-@topica.com
> Sent: Saturday, February 05, 2005 12:17 PM
> Subject: RE: VHB 29 rebuild
>
>
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> Click here and get your free* stock car racing gift.
>http://click.topica.com/caac8uab1dfltbN3z84b/PermissionData
> -------------------------------------------------------------------
> There is also a fiber washer on the fuel inlets.
>
>
> Paul
> 73 Eldo "Elvira" 949 conversion
> 74 Eldo "Daisy" undergoing a full police restoration
> -----Original Message-----
> From: Steve Farris [mailto:nmwi-@msn.com]
> Sent: Saturday, February 05, 2005 12:37 PM
> To: loopframe _guzzi
> Subject: VHB 29 rebuild
>
>
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> We have the 42 Inch Plasma TV you've been looking for!! Sony or
> Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your
> wall today! Click Below
>http://click.topica.com/caac8uBb1dfltb6GIoLb/ExclusiveRewards
> -------------------------------------------------------------------
> OK guys,
> I've got the carbs all sorted out (mostly) I've just got one small
> concern I'd like to address before I put them back on and give the
Eldo
> another try. Perhaps someone like Mark who has rebuilt thousands
of
> these carbs can help me out here. I know that with the VHB
rebuild kit
> there are some parts which aren't used on the VHB 29's but go with
other
> models. I think I have everything figured out and where it goes
except
> I am a little worried about 1 item. In among all the other bits
and
> pieces there are two fiber washers, the larger one goes on the
float
> bowl plug, does anyone know where the smaller one (about 4 or 5mm
OD)
> goes? Just don't want to get the whole thing back together and
find out
> I have take it apart to put in some stupid fiber washer I didn't
put in
> the first time. tia.
> Steve
> 71 Ambo
> 72 Eldo (almost ready to roll!)
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> Like music? Get a CD player on us. Click here.
>http://click.topica.com/caac8ucb1dfltb6GIoLg/PermissionData
> -------------------------------------------------------------------
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> Register today for your chance at our Five Thousand Dollar
> scholarship. Take advantage! Click Here today.
>http://click.topica.com/caac8uub1dfltbN3z84g/FreeScholarshipGuide
> -------------------------------------------------------------------
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> Need a Laptop? Get a Sony Vaio Laptop Free!
>http://click.topica.com/caac8usb1dfltb6GIoLg/ProductTestPanel
> -------------------------------------------------------------------
> Your free subscription is supported by today's sponsor:
> -------------------------------------------------------------------
> Register today for your chance at our Five Thousand Dollar
> scholarship. Take advantage! Click Here today.
>http://click.topica.com/caac8uub1dfltbN3z84g/FreeScholarshipGuide
> -------------------------------------------------------------------
BOB
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
We have the 42 Inch Plasma TV you've been looking for!! Sony or
Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your
wall today! Click Below
http://click.topica.com/caac8uBb1dfltb6GIoLf/ExclusiveRewards
-------------------------------------------------------------------
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Register today for your chance at our Five Thousand Dollar
scholarship. Take advantage! Click Here today.
http://click.topica.com/caac8uub1dfltbN3z84f/FreeScholarshipGuide
-------------------------------------------------------------------
------=_NextPart_000_002B_01C50CE7.300B41F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:v xmlns:o><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<STYLE></STYLE>
<META content="MSHTML 6.00.2900.2523" name=GENERATOR></HEAD>
<BODY id=MailContainerBody
style="PADDING-LEFT: 10px; FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #000000; BORDER-TOP-STYLE: none; PADDING-TOP: 15px; FONT-STYLE: normal; FONT-FAMILY: Verdana; BORDER-RIGHT-STYLE: none; BORDER-LEFT-STYLE: none; TEXT-DECORATION: none; BORDER-BOTTOM-STYLE: none"
leftMargin=0 topMargin=0 acc_role="text" CanvasTabStop="true"
name="Compose message area"><?xml:namespace prefix="v" /><?xml:namespace prefix="o" />
<DIV>
<DIV>bob c., </DIV>
<DIV>what paul said about the kits. the kits have all the o rings and gaskets
you need and more. </DIV>
<DIV>Steve</DIV>
<DIV> </DIV>
<DIV>71 Ambo (about to go under the knife)</DIV>
<DIV>72 Eldo (almost ready to roll)</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="FONT: 10pt arial"><B>From:</B> <A
href="mailto:paul-@comcast.net">Custom Guzzi</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, February 07, 2005 5:58
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> RE: VHB 29 rebuild</DIV>
<DIV><BR></DIV>Your free subscription is supported by today's
sponsor:<BR>-------------------------------------------------------------------<BR>Get
a FREE* Portable Satellite Radio - yours to keep! Click Here!<BR><A
href="http://click.topica.com/caac8uyb1dfltbN3z84a/Portable">http://click.topica.com/caac8uyb1dfltbN3z84a/Portable</A>
Satellite Radio
Promotion<BR>-------------------------------------------------------------------<BR><BR>MG
Cycle has the kits.<BR><BR>Paul<BR>73 Eldo "Elvira" 949 conversion<BR>74 Eldo
"Daisy" undergoing a full police restoration<BR><BR><BR>-----Original
Message-----<BR>From: BOB COLLETT [mailto:coll-@rjrt.com] <BR>Sent: Monday,
February 07, 2005 7:07 AM<BR>To: <A
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A><BR>Subject:
RE: VHB 29 rebuild<BR><BR><BR>Your free subscription is supported by today's
sponsor:<BR>-------------------------------------------------------------------<BR>Need
a Laptop? Get a Sony Vaio Laptop Free!<BR><A
href="http://click.topica.com/caac8usb1dfltb6GIoLa/ProductTestPanel">http://click.topica.com/caac8usb1dfltb6GIoLa/ProductTestPanel</A><BR>-------------------------------------------------------------------<BR><BR>Where
did you gusy get your VHB carb rebuild kits? Was it a complete, <BR>don't need
anything else type kit? I've got 2 VHB 30's I need to rebuild <BR>and replace
the AMALS I'm running. No problems with the AMALS just want <BR>to try the
Del's.<BR><BR>Thanks<BR>Bob<BR>STEVE FARRIS wrote:<BR>> Messagethanks
paul,<BR>> that's exactly what I've put on so far so I hope I'm "good to
go" <BR>> gonna<BR>> go get some fresh gas and give it a try
tonight.<BR>> steve<BR>> ----- Original Message -----
<BR>> From: Custom Guzzi <BR>> To: <A
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A>
<BR>> Sent: Saturday, February 05, 2005 3:42
PM<BR>> Subject: RE: VHB 29 rebuild<BR>> <BR>> <BR>>
Your free subscription is supported by today's sponsor:<BR>>
-------------------------------------------------------------------<BR>>
Get a FREE* Portable Satellite Radio - yours to keep! Click Here! <BR>> <A
href="http://click.topica.com/caac8uyb1dfltbN3z84b/Portable">http://click.topica.com/caac8uyb1dfltbN3z84b/Portable</A>
Satellite Radio <BR>> Promotion<BR>>
-------------------------------------------------------------------<BR>>
Ok, then toss the mini fiber washer and mount your carbs. Never<BR>>
installed one anywhere inside the carb ever. Paper gasket on top, big <BR>>
o-ring on bowl, fiber washer on bowl nut, o-ring on enrichener jet and
<BR>> o-ring on enrichener plunger cap. That's about it if I remember
right.<BR>> <BR>> <BR>> Paul<BR>> 73 Eldo
"Elvira" 949 conversion<BR>> 74 Eldo "Daisy" undergoing a full
police restoration<BR>> -----Original
Message-----<BR>> From: Steve Farris
[mailto:nmwi-@msn.com] <BR>> Sent: Saturday,
February 05, 2005 4:45 PM<BR>> To: <A
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A><BR>>
Subject: Re: VHB 29 rebuild<BR>> <BR>> <BR>> Your free subscription
is supported by today's sponsor:<BR>>
-------------------------------------------------------------------<BR>>
2-Day Tax Refund Loans TaxBrain Online Tax Service Get Started<BR>>
Now!<BR>> <A
href="http://click.topica.com/caac8vhb1dfltb6GIoLb/TaxBrain">http://click.topica.com/caac8vhb1dfltb6GIoLb/TaxBrain</A><BR>>
-------------------------------------------------------------------<BR>>
Paul,<BR>> thanks you are correct I didn't mention
the fiber washer on the fuel <BR>>
banjo.<BR>> but that's not the one I'm concerned
about. the fuel inlet washer is <BR>> about
10-12mm OD the fiber washer I'm wondering about is the smallest
<BR>> one, about 4 or 5mm OD with about a 3mm
ID.<BR>> thanks<BR>>
steve<BR>> ----- Original Message -----
<BR>> From: Custom Guzzi
<BR>> To: <A
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A>
<BR>> Sent: Saturday, February 05, 2005
12:17 PM<BR>> Subject: RE: VHB 29
rebuild<BR>> <BR>> <BR>> Your free subscription is supported by
today's sponsor:<BR>>
-------------------------------------------------------------------<BR>>
Click here and get your free* stock car racing gift. <BR>> <A
href="http://click.topica.com/caac8uab1dfltbN3z84b/PermissionData">http://click.topica.com/caac8uab1dfltbN3z84b/PermissionData</A><BR>>
-------------------------------------------------------------------<BR>>
There is also a fiber washer on the fuel inlets.<BR>> <BR>>
<BR>>
Paul<BR>> 73 Eldo "Elvira" 949
conversion<BR>> 74 Eldo "Daisy"
undergoing a full police
restoration<BR>>
-----Original
Message-----<BR>> From:
Steve Farris [mailto:nmwi-@msn.com]
<BR>> Sent: Saturday,
February 05, 2005 12:37
PM<BR>> To: loopframe
_guzzi<BR>> Subject: VHB 29
rebuild<BR>> <BR>> <BR>> Your free subscription is supported by
today's sponsor:<BR>>
-------------------------------------------------------------------<BR>> We
have the 42 Inch Plasma TV you've been looking for!! Sony or<BR>>
Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your <BR>> wall
today! Click Below<BR>> <A
href="http://click.topica.com/caac8uBb1dfltb6GIoLb/ExclusiveRewards">http://click.topica.com/caac8uBb1dfltb6GIoLb/ExclusiveRewards</A><BR>>
-------------------------------------------------------------------<BR>> OK
guys,<BR>> I've got the
carbs all sorted out (mostly) I've just got one
small<BR><BR>> concern I'd
like to address before I put them back on and give the<BR>Eldo
<BR>> another try.
Perhaps someone like Mark who has rebuilt thousands<BR>of
<BR>> these carbs can help
me out here. I know that with the VHB<BR>rebuild kit
<BR>> there are some parts
which aren't used on the VHB 29's but go with<BR>other
<BR>> models. I think
I have everything figured out and where it goes<BR>except
<BR>> I am a little worried
about 1 item. In among all the other bits<BR>and
<BR>> pieces there are two
fiber washers, the larger one goes on the<BR>float
<BR>> bowl plug, does
anyone know where the smaller one (about 4 or 5mm<BR>OD)
<BR>> goes? Just
don't want to get the whole thing back together and<BR>find out
<BR>> I have take it apart
to put in some stupid fiber washer I didn't<BR>put in
<BR>> the first time.
tia.<BR>>
Steve<BR>> 71
Ambo<BR>> 72 Eldo (almost
ready to roll!)<BR>> Your free subscription is supported by today's
sponsor:<BR>>
-------------------------------------------------------------------<BR>>
Like music? Get a CD player on us. Click here.<BR>> <A
href="http://click.topica.com/caac8ucb1dfltb6GIoLg/PermissionData">http://click.topica.com/caac8ucb1dfltb6GIoLg/PermissionData</A><BR>>
-------------------------------------------------------------------<BR>>
Your free subscription is supported by today's sponsor:<BR>>
-------------------------------------------------------------------<BR>>
Register today for your chance at our Five Thousand Dollar <BR>>
scholarship. Take advantage! Click Here today.<BR>> <A
href="http://click.topica.com/caac8uub1dfltbN3z84g/FreeScholarshipGuide">http://click.topica.com/caac8uub1dfltbN3z84g/FreeScholarshipGuide</A><BR>>
-------------------------------------------------------------------<BR>>
Your free subscription is supported by today's sponsor:<BR>>
-------------------------------------------------------------------<BR>>
Need a Laptop? Get a Sony Vaio Laptop Free!<BR>> <A
href="http://click.topica.com/caac8usb1dfltb6GIoLg/ProductTestPanel">http://click.topica.com/caac8usb1dfltb6GIoLg/ProductTestPanel</A><BR>>
-------------------------------------------------------------------<BR>>
Your free subscription is supported by today's sponsor:<BR>>
-------------------------------------------------------------------<BR>>
Register today for your chance at our Five Thousand Dollar <BR>>
scholarship. Take advantage! Click Here today.<BR>> <A
href="http://click.topica.com/caac8uub1dfltbN3z84g/FreeScholarshipGuide">http://click.topica.com/caac8uub1dfltbN3z84g/FreeScholarshipGuide</A><BR>>
-------------------------------------------------------------------<BR><BR><BR><BR>BOB<BR><BR>Your
free subscription is supported by today's
sponsor:<BR>-------------------------------------------------------------------<BR>We
have the 42 Inch Plasma TV you've been looking for!! Sony or
<BR>Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your <BR>wall
today! Click Below<BR><A
href="http://click.topica.com/caac8uBb1dfltb6GIoLf/ExclusiveRewards">http://click.topica.com/caac8uBb1dfltb6GIoLf/ExclusiveRewards</A><BR>-------------------------------------------------------------------<BR><BR>Your
free subscription is supported by today's
sponsor:<BR>-------------------------------------------------------------------<BR>Register
today for your chance at our Five Thousand Dollar <BR>scholarship. Take
advantage! Click Here today.<BR><A
------=_NextPart_000_002B_01C50CE7.300B41F0--