Subject: still no spark-HELP!
Author: Chris Berry
Date: Mar 30, 2003, 12:28 PM
Post ID: 1712439382
Okay here's where I am...
1. I have power to the coil from the ignition switch.
2. Coil reads 1.8-2.1 ohms.
3. New points adjusted and gapped correctly.
4. All plug and coil wires test good with the meter.
5. New spark plugs gapped correctly.
6. Still no spark...I've pulled the HT wire from the
distributor and held it near to ground and cranked the
engine and I see no spark at all.
Will a bad condenser shut everything down like this? It's
the only thing I can come up with. If I remove the
condenser and try to crank the engine, will it work or
hurt anything?
I am at wits end here...looks like Ken may be making a
trip down to see me next week.
Any advice will be appreciated. Also, am I overlooking
anything be it simple or not?
TIA!
Chris Berry
1974 Eldo Civilian (for sale)
"Not everything that counts can be counted and not
everything that can be counted counts"
-Albert Einstein