Topica Loopframe_Guzzi Archive


Subject: Re: No spark....now what?

Author: Ian Adkins

Date: Oct 7, 2001, 12:09 PM

Post ID: 1708509202


Tim,

If you are getting electricity to everything but the plugs then the problem
is the coil or the main lead to the distributor..... Also a weak spot could
be the ignition switch. You sure you have the rotor on inside the
distributor :-) What about the leads....are they going to the correct part
of the distributor?

Best way to solve your dilemma is to start with a basic diagnostic. Start
with the battery and then move along the various paths till you isolate
where the break in the circuit is.

When I was rebuilding my 70 Ambo any electrical problem I had was related to
a faulty ground. In fact on my recent run the to Adirondak Rally my bike
quit dead all of a sudden. With a volt meter I traced the problem to a
faulty main ground.

Good luck and be sure to let us know what you learn.

Regards...Ian

-----Original Message-----
From: Tim <tf-@gte.net>
To: Loopfram-@topica.com <Loopfram-@topica.com>
Date: October 7, 2001 1:23 PM
Subject: No spark....now what?


 
I won't bore you with the details of bloody knuckles and foul language,
but
 after many long hours of putting together my Eldo, I go to start it and
have
 no spark.

Suggestions? All connections and wires are good, power to the coil, etc.
I
 even switched out the coil with another and had nothing. Any way to test
the coils?

Thanks,
Tim
1972 Eldorado es muy frustrado!

Entire thread: