Topica Loopframe_Guzzi Archive


Subject: RE: Eldo problem

Author: Keith Ruff

Date: Sep 27, 2001, 1:34 PM

Post ID: 1708398107


Don't know if anyone makes a gasket for it, but I do recall a
conversation some time back where a guy used a softball cover to make a
gasket, said it worked like a charm!

Good Luck.

Keith Ruff
71 Police Amabassador - NJ

murp-@aol.com wrote:
 Hello all,
I finally got my Eldo restoration done, and got it running
yesterday, but have a few minor problems.
The left carb has a problem in that it will only run with the choke
partially on. With the choke off, the laft side will not run at all, but

as I increase the choke, it will start to run lean (backfires) but will
run properly if I give it a little more choke. I rebuilt both carbs, and

have had no problems at all with the right side. Since having this
problem, I have disassembled the carb completely, and checked for any
air leaks between the intake manifold and carb, but had no success. The
right side has the same size jets as the left, and runs fine, so I am
stumped. Any help would be appreciated.
My only other problem is with the gas cap gasket. My gas cap leaks
a little gas onto the tank. Does anyone know where I can get a new
replacement gasket?
Thanks,
Brian Murphy
'74 Eldo
'78 T3

Entire thread: