Subject: RE: shifter
Author: Zerhackermann .
Date: Jun 20, 2001, 11:57 AM
Post ID: 1707193091
Hmm I didn't specify that this is a floorboard setup. The H/T shifter
doesn't have any splines. smooth pivot with a brass bushing, washer and
retainer bolt. the pivot seems to be worn so I am looking at (easiest) and
outside fix of soft washers (2 with a teflon washer in between?) or bearings
OR (more difficult) having a thicker bushing machined.
| From: "Scheer, Peter L" <plsc-@tycoelectronics.com> Reply-To: Loopfram-@topica.com To: "'Loopfram-@topica.com'" <Loopfram-@topica.com> Subject: RE: shifter Date: Wed, 20 Jun 2001 14:45:46 -0400 ============================================================ TopOffers. The Smart Shoppers Savings Secret! Cool savings. Hot deals. Free Stuff. All right in your in-box. http://click.topica.com/caaacgKb1dfltb2c9oVa/TopOffers ============================================================ Maybe this helps. The shifter shaft has a black plastic collar on the opposite end from the splines. Cant tell if it acts as a bushing or as a way to hold sideways position. I dont have any position problem with it.
|
_________________________________________________________________
Get your FREE download of MSN Explorer athttp://explorer.msn.com