Subject: Re: Introduction
Author: Charles Mullendore
Date: Jul 21, 2000, 5:38 PM
Post ID: 1701514236
Hi Bruce,
I have been told that Harpers has or will have the round rubber seal. I replaced
mine with the later style ( with adapters you must use ) from Moto-International
after trying unsuccessfully to make seals. I haven't checked with Harper's to see
if they have them, but was told they were in progress two years ago. Good luck!
Charlie
Gapland,MD
'69 Ambassador
'71 Ambassadors (2)
Bruce Giller wrote:
| --- Sponsor's Message -------------------------------------- STEALS AND DEALS! Cheapest prices on airfare, insurance, new cars, contractors, insurance, maids, collectibles, more. Get exactly what you want at the lowest price. New FREE service! http://click.topica.com/aaaaudb1dfltb1rVuAa/Imandi_com ------------------------------------------------------------ I meet my Eldo 5 years ago in Albany, NY. I drove up from Takoma Park, Md to Albany and back in one day in my '79 Chevy pickup. On the way up, the bed was empty, on the way back the bed was occupied by a red 1972 Eldorado. It had a Wixom fairing and hardbags, a Travelcade King/Queen seat (original in a bag), luggage rack and small sissy bar. I spent that winter overhauling it for it had sat for many a year without anyone paying any attention to it; the clutch was oiled up due to a leaky tranny seal. At least it was stored inside all that time. I got to know the construction of the bike quite well - even got to make a few Guzzi tools. Recently I had the Travelcade seat replaced with a Rich Maund seat which served my wife and I extremely well on our trip out West. 10 hour days were normal and neither of us had sore a**s.....well not until the end of the trip. The Eldo performed flawlessly (ok, just one burp after a gas fillup which I attribute to bad gas) even in pouring rain where all I could see was the white line on the side of the road. But I was leaking oil from the front seal and the right side cylinder base (a new seal and Speedi-Sleeve for the front and new gaskets and O-rings for the cylinder should take care of them) - had to fill up with a quart every two days. Left side exhaust nut vibrated loose (have new style nuts from MI) and lost the two front turn signal lights (filaments broke). Not much going wrong on a 28 year old bike on such a long trip. I found a auto parts/repair place in Boise City, OK which lent me a chain ViseGrip to tighten the exhaust nut. The head mech. asked what kind of bike and I said Moto Guzzi. He replied that he hasn't seen one of them for years...and do they still make them? I said they sure do and told me about the different models. On the trip, I noticed that both of my fuel petcocks weep a bit. I know that you can no longer get replacement rubber bits for these petcocks (Guzziology suggests to replace them with new style petcocks). But I like the old style design (almost like the terrible handlebar controls) and I want to keep them. The only rubber bit to be replaced in the petcock is a large rubber disc with two holes. I was thinking of making up some new ones but out of what kind of material ... and where to find it. Any ideas of what kind I should use? Bruce '72 Eldo ___________________________________________________________ T O P I C A The Email You Want.http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics |