Subject: RE: Upper tree plate
Author: Paul P. Linn
Date: Aug 20, 2005, 7:38 AM
Post ID: 1719324938
You should have a big washer underneath both fork tube plugs.
Paul
-----Original Message-----
From: Keith K [mailto:kkurb-@aol.com]
Sent: Saturday, August 20, 2005 10:35 AM
To: Loopfram-@topica.com
Subject: Upper tree plate
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get $1000.00 Overnight! Fast and Easy!
No Credit Checks! Many Lenders are 100% Paperless!
Let The Wizard Find the right Lender for you!
http://click.topica.com/caadOutb1dfltb6GIoLa/911PaydayAdvance
-------------------------------------------------------------------
I was looking through the manual, and I see on the upper plate where it
slips onto the shocks, there is a washer on the right side, and none on the
left. This causes the handlebars to lean left if you tighten the big nuts
down that hold the plate.
Is there a trick to balancing this out, even in the manual it shows a cir
clip or washer on the right side and none on the left. I was curious if
something else had to go underneath but couldn't find out anything by
looking at the diagram.
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to reduce
wrinkles by 68% Click here to get your 30-day free supply.
http://click.topica.com/caadOvzb1dfltb6GIoLf/Nexiderm
-------------------------------------------------------------------