Subject: RE: Heads
Author: Paul P. Linn
Date: Jul 26, 2005, 4:05 PM
Post ID: 1719211399
Greg,
You will need to use the T3 head and base gaskets. The pushrod holes in the
jugs will also need to be reamed out so your pushrods don't come in contact
with the sides. The gaskets on the T series have oval holes for the pushrods
whereas the Loop type are just round. If you don't do the mods then the
pushrods will wear out rubbing against the gaskets and the Ambo pushrod
tubes. I believe Guzziology tells you about it also.
Paul
-----Original Message-----
From: Greg Bender [mailto:gr-@thisoldtractor.com]
Sent: Tuesday, July 26, 2005 6:40 PM
To: Loopfram-@topica.com
Subject: RE: Heads
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caadHlxb1dfltb6GIoLa/ProductTestPanel
-------------------------------------------------------------------
Perhaps just a set of T3 head gaskets? Seems to be a different part number
than the Ambo/Eldo head gaskets. I probably just need to call Rick and
Gordon and see what they have to say.
Skip & Jane wrote:
I think you will have to do some mods to gasket push rod holes. other than that I think they will bolt on Skip & Jane Kologiski Bird at The Wheel Vintage Motorcycle Stuff http://home.earthlink.net/~kkologiski/bird.html Central Florida Reps for the MGNOC (Moto Guzzi National Owners Club). Fla Guzzi Sitehttp://www.thisoldtractor.com/fl_mgnoc/ Coma Vintage Motorcycle Group http://www.thisoldtractor.com/coma/index.html ----- Original Message ----- From: "Greg Bender" <gr-@thisoldtractor.com> To: <Loopfram-@topica.com> Sent: Tuesday, July 26, 2005 4:54 PM Subject: Heads Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Are you a lottery player?Play smarter! Improve your odds and detect winning patterns. Access the best kept lottery secret on the Net. Easy to use! http://click.topica.com/caadMRWb1dfltbOSvhLa/LotteryVault ------------------------------------------------------------------- I picked up a set of T3 heads that I'm going to be putting on the Ambassador. The heads came complete with rockers, pushrods, etc. Can I just swap things out or is there more to it than that? Do I need to address anything with the push rod tubes or gaskets? Regards, Greg Bender 1971 Ambassador 2000 Quota http://www.thisoldtractor.com/gtbender Florida MGNOC website http://www.thisoldtractor.com/fl_mgnoc Minnesota MGNOC website http://www.thisoldtractor.com/mn_mgnoc Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Get $1,000 to spend on groceries. any way you please. Click here! http://click.topica.com/caadHlsb1dfltbOSvhLf/GrocerySpree ------------------------------------------------------------------- |
Regards,
Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender
Florida MGNOC website
http://www.thisoldtractor.com/fl_mgnoc
Minnesota MGNOC website
http://www.thisoldtractor.com/mn_mgnoc
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to reduce
wrinkles by 68% Click here to get your 30-day free supply.
http://click.topica.com/caadHllb1dfltb6GIoLf/Nexiderm
-------------------------------------------------------------------