Subject: Re: Seals & O rings
Author: John Chicoine
Date: Mar 15, 2005, 5:31 AM
Post ID: 1718546880
Bill:
I know that this is an outlandish idea but, why not call Gordon and ask him!!
John
67 V700, Ambo's & Eldo's
----- Original Message -----
From: bluezi-@att.net
To: Loopfram-@topica.com
Sent: Monday, March 14, 2005 9:19 PM
Subject: Seals & O rings
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to
reduce wrinkles by 68% Click here to start your free trial today.
http://click.topica.com/caadfBNb1dfltbN7eKTb/Nexiderm
-------------------------------------------------------------------
This evening was spent taking the Bronze Beauty apart to get at the clutch to replace it with a RAM, all the info I found here was real helpful,...but WHAT A PAIN JUST TO GET TO THE DAMN THING!!! I've replaced many clutches in Jap & British bikes, and never did I have to take so much off the bike to get at them!!!
Okay, I'm done venting. Now for my question: When I ordered the clutch, I told Gordon to send whatever seals and "O" rings that should be replaced when doing such a job. The problem is that now that it's all apart, I can't for the life of me see where three of the o-rings he sent belong. The first is 2.7 cm in diameter, the second is 2.5 cm diameter, and the third is 2.2 cm diameter. There are also three little cone shaped rubber things, each is 1 cm on one end and .7 cm on the other, and .7 cm in length......What the hell are they for?!?!?!?
You guys that have been down the RAM clutch road, can you help me on this one?
Thanks
Bill
73 Bronze Eldo
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a FREE* MP3 Player - yours to keep! Click Here Now!
http://click.topica.com/caadeMpb1dfltbN7eKTg/MP3Player Giveaway
-------------------------------------------------------------------