Subject: RE: Fork disassembly
Author: Bruce Giller
Date: Feb 24, 2005, 6:02 AM
Post ID: 1718447536
Bob,
Yep, R&R'ing your fork seals is well within the sphere of a
weekender-type mechanic. But there is one tool that you really need. And
that is the one that allows you to reattach the fork tube to the bike.
Since the spring is on the outside of the tube, you need to pull the tube up
the triple tree to screw in the top plug; all this against the fork spring.
I made one out of a new top plug and some 1/4" steel rod. I
threaded a rod end and then tapped the plug with the same size. Screwed the
rod onto the plug and welded a T handle on the end.
I'm not sure if there is such a tool being passed around from
Loopframe owner to Loopframe owner like Stephen's VIN rivet removal tool.
But I'd be willing to lend you mine, if you need it.
Bruce
-----Original Message-----
From: Robert Hawkes [mailto:3haw-@bluefrog.biz]
Sent: Thursday, February 24, 2005 11:30 AM
To: Loopfram-@topica.com
Subject: RE: Fork disassembly
Bruce et al,
My fork seals have been leaking since I bought my Ambo 5 years ago, they
don't leak anymore because all the fork oil ran out a long time ago! Can I
get fork seal kits from MG? How much? And, most importantly, assuming I
can get the fork tubes out, this seems to be the biggest problem, can this
job be done well by your average shade tree, ham-fisted,
weekender-type mechanic? Bob