Subject: RE: A Few Questions and Parts 4 Sale
Author: Robert Hawkes
Date: Oct 31, 2004, 3:19 AM
Post ID: 1717795995
Keith, is that a Marelli regulator? Can't contribute to your other
questions, but good luck, Bob
-----Original Message-----
From: Keith Ruff [mailto:klru-@comcast.net]
Sent: Saturday, October 30, 2004 6:05 PM
To: Loopfram-@topica.com
Subject: A Few Questions and Parts 4 Sale
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
4 Free Low-Fat recipes
http://click.topica.com/caacNoQb1dfltb7ukc8a/PermissionData
-------------------------------------------------------------------
Spent most of the day starting the cleanup process of the new Ambo and
came across a few things that I can't remember the answers for:
1. My tank has the old suicide cap. Are these still available? I
cleaned it up pretty good but was wondering if they were available. If
they are, I may just replace it.
2. Is it normal for some oil to weep out of the drive shaft boot? My
71 did not do this. This one has a new boot on it, the front part
closest to the tranny has a drop waiting to hit the floor, not much, but
is this normal? Is there a seal inside that may need to be replaced?
Rear side of boot also was slightly wet. I just installed new clamps
and torqued them up pretty well.
3. The right side of the engine casing must have cracked open at one
time and has since been repaired (obvious repair as you can see a glop
of solder just under the cylinder head by the last waffle line if that's
what they are called). I sort of remember reading about this but don't
remember what the cause was and if this was common.
4. I pulled the gen belt cover off to polish it and while inside, I
squeezed the belt to check the tension. I noticed when I did this that
the gen moved downward a little and touched the top of the engine casing
where it sits. Where does the gen bracket crack as I believe I may have
a suspect gen bracket, and how do I fix it if it is busted. I remember
there was sort of way to reinforce the bracket, don't recall how. Other
strange thing was that there were no extra spacers in front of the
pulley wheel. Either they are all in the center or some are behind the
pulley on the engine case side, else I am missing a bunch.
As for parts, I have quite a bunch of parts that I will be selling once
I get time to take a good inventory and take some digital pictures. I
figured I would e-bay it all, but wanted to throw these parts out here
on the board to my fellow loop owners for 1st dibs. Here is the list so
far:
- extra wheels (complete wheels with good brake shoes)
- spare set of brake shoes
- dual seat, recovered with Moto Guzzi silk screen on back and center
leather handle - looks like a Harpers cover.
- Wixom trunk, black with white pinstipes, nice and shiny but on an
angle it looks like there are some star cracks on the top, not bad
- original handlebar mounted windshield
- rear drive (geared for sidecar)
- original gearing for above drive
- drive shaft/U-joint for above drive
- oil pan
- regulator (believed to be in good working order per Mick, needs to be
cleaned)
- 4 matching turn signals with arms, nice shape
- good starter with bad solenoid
If interested in any of these parts, send me an e-mail and make me a
fair offer.
Thanx!
Keith Ruff
Manahawkin, NJ
70 Ambo
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Free recipes to get you in shape
http://click.topica.com/caacNoTb1dfltb7ukc8f/PermissionData
-------------------------------------------------------------------