Topica Loopframe_Guzzi Archive


Subject: Re: bolt size questions

Author: Jeff Meegan

Date: Jul 18, 2004, 9:18 AM

Post ID: 1717179498



Thanks, and thanks also to Paul Linn who sent me the spreadsheet.

Those machined bolts from Joe Kenny look sweet. I'll have to order a
pair.
You were dead on on the stud size...or at least they fit. I planned
to get
oversized bolts and remove the threads from the portion the bushing
rode on. I'll see if I can get a stock pair first though.

jeff

On Jul 17, 2004, at 9:33 PM, Greg Bender wrote:

 Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a Great Credit Card for You Today
You can find a credit card to fit your credit needs.
All types of credit cards -- 0% APRs, Rewards, & Bad Credit.
http://click.topica.com/caacpgdb1dfltb2Prgna/411Web
-------------------------------------------------------------------

Hi Jeff,

The side cover uses 6.0 mm x 1.0 mm bolt threads. As an alternative to
using long regular bolts or trying to find originals, you may want to
purchase a nicely machined set from Joe Kenny
(http://www.swva.net/jkenny/).

I *think* the shock studs are 12 mm x 1.5 mm where the screw into the
frame and 10 mm x 1.25 mm for the nuts that hold the shock onto the
stud
(someone please correct me if I am wrong). My only concern with using
threaded rod is that the threads will dig into the rubber shock
bushings...drastically reducing the life of the rubber bushings.
Perhaps, though, you could use a steel collar to prevent this problem.
Also, as you mention, you'll want the rod to be some heavier grade of
hardened steel. Personally, I would try really hard to get the original
studs, as I would not want to experience the damage caused by shearing
shock studs. For other possible sources for the original studs, start
by
trying Mark Etheridge athttp://www.motoguzziclassics.comor the Moto
Guzzi Junk Yard in Wichita, KS (316-838-3399). Good luck!

Regards,

Greg Bender

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacpgjb1dfltb2Prgnf/OmahaSteaks
-------------------------------------------------------------------

Entire thread: