Topica Loopframe_Guzzi Archive


Subject: RE: Metal cleaner

Author: Custom Guzzi

Date: Jan 26, 2004, 1:23 PM

Post ID: 1715863281



Mine did the same thing. I sprayed it on and scrubbed it in with a stiff
brush and then washed it off with some hot soapy water. I did this at
least two maybe three times and it cleaned off all the old grease and
road crud. Just make sure you rinse it with hot soapy water really good
to get all the cleaner off.

Paul
Midlothian, Va
MGNOC#19926
73 Eldo "Elvira" next project
74 Eldo "Daisy"

IndyDi-@aol.com wrote:
 Okay...about this oven cleaner. I sprayed the tranny cover and the whole

thing turned charcoal grey in about 10 seconds!! Then about an hour with
detergent
to get off the grey!! Still not pretty...another application? Is this
"burning" the alloy, or is it removing deep down grease from 30 years.
It wasn't
visibly that greasy when I started. Thx,

Entire thread: