Topica Loopframe_Guzzi Archive
 

Subject: Re: Windshield mounting questions

Author: Rex and/or Kathleen

Date: Mar 2, 2003, 4:57 PM

Post ID: 1712098362

Rich, John and Sam,

Thanks for your ideas and suggestions. As always they are greatly
appreciated. You've given me a couple of options to pursue. Thanks again.

Rex

----- Original Message -----
From: "Rich Marchand" <rmarch-@earthlink.net>
To: <Loopfram-@topica.com>
Sent: Sunday, March 02, 2003 3:08 PM
Subject: Re: Windshield mounting questions


 Harpers also carries a windshield mounting bracket that I have used for
several years with no problems...you don't have to cut into instrument
panel
 to use
http://www.harpermotoguzzi.com/windshie.htm

Hope this helps
Rich Marchand
74 Eldo
----- Original Message -----

From: "John Prusnek" <spaj-@raex.com>
To: <Loopfram-@topica.com>
Sent: Sunday, March 02, 2003 3:21 PM
Subject: Windshield mounting questions


 Rex:
There's a mounting bracket available that has a ring at the top that
is attached under your fork plug, and mounts to the outside of the pinch
bolt on your lower triple tree. You'll have to cut a notch in your
instrument panel for clearance if it's not there already. I'm using this
to run a National Cycle Harley style windshield on my '71 Ambo. I think
the Eldo should be the same. It puts the distance between the mounting
points of your windshield at 13-1/2". If that's what you have for your
Memphis shades shield you should be OK. There's a picture at
http://myweb.core.com/photos/spajohn@raex.com/71Ambo
It doesn't detail the bracket, but you get the general idea.

John Prusnek

 hey guys contact mg cycles in albany, wisconsin at 608-862-2300
info/888-464-2925 to order. or mark at moto guzzi classics in signal
hill,ca
 at 562-986-0070.
 
 both of them are full of as much info as you need!
sam
70 ambo
Rex and/or Kathleen <rccla-@attbi.com> wrote:Hi all, I have
acquired
 a brand new Memphis Shades Memphis Fats 17 tall clear windshield (the
price
 was right!). I was wondering if anyone knew of a mounting kit that would
allow me to put this on my '72 Eldorado LAPD. I don't find anything listed
on the Memphis Shades website for this bike. Does National Cycle still
make
 mounting brackets and if so do you think they would fit this windshield.
Thanks in advance for any help or suggestions. Rex Clark
 
 


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.458 / Virus Database: 257 - Release Date: 2/24/03

Entire thread: