Subject: Re: Flywheel torque
Author: andy hill
Date: Oct 11, 2002, 10:14 PM
Post ID: 1711192724
Paul-
yep- this is 4 the bolts that hold the flywheel to the crank [w/
lock-tabs]. i was a bit suspect of the very 'low' ##, but that is what Dave
said. 8lbs. is freaky! if you want, i can double check tommorrow nite [sat.]
when i get back home with Keith's bike. and get you the pressure plate
torque specs., too. Elvira! i love it!!!
andy
----- Original Message -----
From: "Paul Linn" <paul-@attbi.com>
To: <Loopfram-@topica.com>
Sent: Friday, October 11, 2002 09:12 AM
Subject: Re: Flywheel torque
Andy,
Thanks. Now is this for the 6 on the flywheel and the 8 on the ring gear.
All of them are the silver kind. The flywheel 6 have the locking tabs but
the 8 ring gear bolts do not.
Paul
Richmond, Va
73 Eldo custom project "Elvira" coming together slowly
76 T3 basket
----- Original Message -----
From: "andy hill" <alh-@adelphia.net>
To: <Loopfram-@topica.com>
Sent: Friday, October 11, 2002 12:06 AM
Subject: Re: Flywheel torque
| Paul- i believe it's 28 ft.lbs. for the dark colored bolts. according to dave richardson, the earlier silver colored bolts only go to 8 ft.lbs. [!!!] correct me if i'm wrong! andy ----- Original Message ----- From: "Paul Linn" <paul-@attbi.com> To: <Loopfram-@topica.com> Sent: Thursday, October 10, 2002 09:39 PM Subject: Flywheel torque Anyone have the flywheel torque settings. My books seem to not have this |
| I don't believe you just tighten them till tight. Paul Richmond, Va 73 Eldo custom project "Elvira" coming together slowly 76 T3 basket |