Subject: Re: Flywheel torque

Thanks for the info Fred.

Paul
Richmond, Va
73 Eldo custom project "Elvira" coming together slowly
76 T3 basket
----- Original Message -----
From: "Fred Sahms" <fr-@fredsgarage.net>
To: <Loopfram-@topica.com>
Sent: Friday, October 11, 2002 9:23 AM
Subject: RE: Flywheel torque

I wouldn't use the color alone. Some 10.9 grade bolts are bright plated
and some are black. Go by the number. I always buy new
flywheel-to-crank bolts, and use new schnoor washers and a bit of blue
locktight, and torque to 30 ft/lbs.

The ring-gear bolts are usually bright and grade 8.8. I reuse them.

Paul Linn wrote:

Andy,

Thanks. Now is this for the 6 on the flywheel and the 8 on the ring
gear.
All of them are the silver kind. The flywheel 6 have the locking tabs
but
the 8 ring gear bolts do not.

Paul
Richmond, Va
73 Eldo custom project "Elvira" coming together slowly
76 T3 basket
----- Original Message -----
From: "andy hill" <alh-@adelphia.net>
To: <Loopfram-@topica.com>
Sent: Friday, October 11, 2002 12:06 AM
Subject: Re: Flywheel torque

Paul-
i believe it's 28 ft.lbs. for the dark colored bolts. according to

dave

richardson, the earlier silver colored bolts only go to 8 ft.lbs.

[!!!]

correct me if i'm wrong!
andy
----- Original Message -----
From: "Paul Linn" <paul-@attbi.com>
To: <Loopfram-@topica.com>
Sent: Thursday, October 10, 2002 09:39 PM
Subject: Flywheel torque

Anyone have the flywheel torque settings. My books seem to not have

this

and

I don't believe you just tighten them till tight.

Paul
Richmond, Va
73 Eldo custom project "Elvira" coming together slowly
76 T3 basket

73 Eldo (motor in the frame!)
78 T3/949

Subject: Re: Flywheel torque

Author: Paul Linn

Date: Oct 11, 2002, 8:58 AM

Post ID: 1711188935

Entire thread: