Subject: RE: con-fuse-ed
Author: thomas short
Date: Mar 30, 2002, 3:29 PM
Post ID: 1709957692
Ish, electrical problems.....
Could be an internal short in the brake switch itself.. Is your's the
original little metal box? Check it with an ohm meter, just don't ask me
how or what to look for .......
Wait, yes you can. Hook up the meter to each side of the box-one on
power in, one on power out. There should be no signal. Then, activate
the switch.(push the pin in) There should be continuity then. If you
have continuity before activating the switch, the switch is bad.
As always, I could be totally off my nut! HTH!
David Washburn wrote:
| Continued to circle the neighborhood with the Eldo singing a sweet song. The fly in the ointment is the brakelight. By the time I come back from one of my little jaunts my brakelight fuse is toast. I have tried to track the short from both ends of the bike but can't seem to locate it. Please post your timesaving electron-chasing techniques. David |
Tom Short
AZ MGNOC Rep
Phoenix, AZ