Subject: Re: Generator Woes/Alternator conversion? (Long)
Author: Allan
Date: Dec 20, 2001, 11:29 PM
Post ID: 1709207424
This is a multi-part message in MIME format.
------=_NextPart_000_001C_01C189C9.35153A60
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
Thanks for the info. I think I will call in a marker from a machinist friend and see if we can fabricate a bracket that will hang from the frame yet leave the gen in the stock position. If anything you have givin me some ideas to work with. The quick and dirty flip the bracket over would certainly get me on the road tomorow, it is tempting but something nice looking would be better. I don't mind if the bike is stock but it cannot look bad or thrown together if I can help it. The alternator idea is good as they are usually lighter
and would not tend to tear their brackets off from vibration. I sure miss my old Amb.
Allan
72 Eld with 1066cc kit which is why the block is staying however the gen is mounted.
----- Original Message -----
From: Charlie Mullendore
To: Loopfram-@topica.com
Sent: Thursday, December 20, 2001 6:28 PM
Subject: Re: Generator Woes/Alternator conversion? (Long)
============================================================
Here's an easy $75.00! Grab a piece of the action - on the
house! Get $75.00 FREE when you purchase only $25. That's
More Money...More Fun...and MORE chances to Strike It Rich!
Claim Your Bonus, Click Here:
http://click.topica.com/caaadHBb1dfltb2OCoyb/GoldenPalace
============================================================
Hi Allan,
There is the possibility of mounting an alternator instead of the generator. There was a "950" Eldo at the WNY Rally that had been converted to an alternator using one from a Geo Metro. The owner, Dale Peterson, fabricated an aluminum plate that bolted to the front of the timing cover (just behind where the generator belt runs) and used the top two timing cover bolts to hold it in place. The Geo alternator had its mounting "ears" cut off and the bracket was bolted to the front of it (I think he used the alternator "through bolts" somehow). There was a small "L" shaped bracket at the back of the alternator to help support it also. The Geo pulley was left on the alternator and the crank pulley was stock Eldo. The generator belt cover was unaltered. The whole conversion was so nicely done that he had to take the generator belt cover off for us to see how it was mounted. I believe Gary Cheek is working a conversion using the same alternator - maybe he could help?
While I'm on the subject of Dale's bike, I'd like to share a few other things he did that I found interesting. He used studs with s.s. acorn nuts a number of places on the bike where frequent disassembly might destroy the threads eventually using bolts. For instance, on the carbs. where the fuel inlet "banjo" attaches and on the gen. belt cover. He also used studs to attach the timing cover and the oil sump. He drilled small holes (approx. 1/16") in the top of the carbs above the slides. He would measure the height with a piece if wire he carried in his toolkit and when he was done there were small pegs to plug the holes. Relays for the horns and lights along with the circuit breakers were mounted inside the right-side toolbox. There's probably a few more details I've forgotten to mention. I've got pictures of this very nice red/white/green creation and will post them as soon as I get time. Cheers,
Charlie
----- Original Message -----
From: Allan
To: Loopfram-@topica.com
Sent: Thursday, December 20, 2001 2:42 AM
Subject: Re: Generator Woes
============================================================
* More effective email marketing is a click away! * Get
professional email tools to create professional campaigns.
Target mailings, deliver in HTML, and track your success.
Try Topica Email Publisher. Now FREE for 60 days!
http://click.topica.com/caaaeQ8b1dfltb2Luw3b/TopicaEmailPublisher
============================================================
Hi
I did the shim for the front of the generator already. The mounting pads with the two bolt holes had been machined away and the space filled with aluminum barstock which was welded into position, the barstock has come loose frome the welds. there is nothing holding the gen. bracket to the engine anymore. I don't see a way to repair this that will last. that was why I was looking for an alternative for mounting the generator.
----- Original Message -----
From: Patrick Hayes
To: Loopfram-@topica.com
Sent: Wednesday, December 19, 2001 7:20 PM
Subject: Re: Generator Woes
============================================================
Win 5 Great DVDs - "Shrek", "The Matrix" plus 3 More!
ViDVD is the first multimedia DVD player to support CD-R/W,
MP3, digital photos, and Internet access. The next
generation DVD player is here!
http://click.topica.com/caaaeZJb1dfltb2OCoyb/Vialta
============================================================
In a message dated 12/19/2001 2:41:54 PM Pacific Standard Time, mut-@msn.com writes:
I just can't
face having the engine down again to reweld this with the chance of
distorting the lifter bores.
So don't. I ran my 73 Eldorado for over 100,000 miles with a worn down generator support yoke casting. Without the support at the front end of the generator, vibration will quickly tear the generator bracket to pieces.
Just mount the generator gently and measure or otherwise determine the amount of slop between the generator and the casting. Now get a comparable piece of brass of the same or slightly larger thickness and cut a shim to fit in there. Some snipping and tapping will get it to fit into its curve. If done well, you can have tabs to bend over and hold it in place. The shim will securely take up the loose space and work for maybe 50,000 miles. What more do you want? Let me know if you want a picture and I'll try to draw one.
The big issue is on reinstalling the generator and belt. If you make the belt too tight, it will crush the brass shim quickly, allowing the generator to rock and again break the mounting bracket or one of its mounting bolts. If you make the belt too loose, it will flop and vibrate and set up some motions which might accelerate crushing of the shim. The loopframe belt should be just tight enough to not flop around and certainly NOT taut. It should be nothing like a power steering or air conditioner belt. Just snug.
Patrick Hayes
Fremont CA
EV, EV, SPII, V-65-C, Monza, SuperAlce
MGNOC L-403
============================================================
FREE SHIPPING on high quality apparel from Outer Banks!
Order by 12/31/01 for 30% OFF with this coupon code: PEACE
Outer Banks has had great styles for Men & Women since
1983:
http://click.topica.com/caaaeTCb1dfltb2OCoyg/OuterBanks
============================================================
===================================================
A PRODUCTION SERVER AS EASY TO USE AS YOUR MAC.
You'll learn how Mac OS X Server can streamline your workflow,
provide centralized storage and simplify network administration.
http://click.topica.com/caaaeY9b1dfltb2Luw3g/AppleAcademy
===================================================
============================================================
The real heroes of the New York tragedy
are without a doubt the FIREFIGHTERS.
Forever Defending...Never Yielding Baseball Hats
http://click.topica.com/caaaeExb1dfltb2OCoyg/FDNYhats
============================================================
------=_NextPart_000_001C_01C189C9.35153A60
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 5.50.4616.200" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Thanks for the info. I think I will call in a marker from a
machinist friend and see if we can fabricate a bracket that will hang from the
frame yet leave the gen in the stock position. If anything you have givin me
some ideas to work with. The quick and dirty flip the bracket over would
certainly get me on the road tomorow, it is tempting but something nice looking
would be better. I don't mind if the bike is stock but it cannot look bad or
thrown together if I can help it. The alternator idea is good as they are
usually lighter</FONT></DIV>
<DIV><FONT size=2>and would not tend to tear their brackets off from vibration.
I sure miss my old Amb.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Allan</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>72 Eld with 1066cc kit which is why the block is staying
however the gen is mounted.</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=C.D.-@worldnet.att.net
href="mailto:C.D.Mul-@worldnet.att.net">Charlie Mullendore</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=Loopf-@topica.com
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, December 20, 2001 6:28
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Generator Woes/Alternator
conversion? (Long)</DIV>
<DIV><BR></DIV><PRE>============================================================
Here's an easy $75.00! Grab a piece of the action - on the
house! Get $75.00 FREE when you purchase only $25. That's
More Money...More Fun...and MORE chances to Strike It Rich!
Claim Your Bonus, Click Here:
<A href="http://click.topica.com/caaadHBb1dfltb2OCoyb/GoldenPalace">http://click.topica.com/caaadHBb1dfltb2OCoyb/GoldenPalace</A>
============================================================</PRE>
<DIV><FONT face=Arial size=2>Hi Allan,</FONT></DIV>
<DIV><FONT face=Arial size=2>There is the possibility of mounting an
alternator instead of the generator. There was a "950" Eldo at the
WNY Rally that had been converted to an alternator using one from a Geo Metro.
The owner, Dale Peterson, fabricated an aluminum plate that bolted to the
front of the timing cover (just behind where the generator belt runs) and used
the top two timing cover bolts to hold it in place. The Geo alternator had its
mounting "ears" cut off and the bracket was bolted to the front of it (I think
he used the alternator "through bolts" somehow). There was a small "L" shaped
bracket at the back of the alternator to help support it also. The Geo pulley
was left on the alternator and the crank pulley was stock Eldo. The generator
belt cover was unaltered. The whole conversion was so nicely done that he had
to take the generator belt cover off for us to see how it was mounted. I
believe Gary Cheek is working a conversion using the same alternator - maybe
he could help? </FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>While I'm on the subject of Dale's bike, I'd like
to share a few other things he did that I found interesting. He used
studs with s.s. acorn nuts a number of places on the bike where
frequent disassembly might destroy the threads eventually using bolts.
For instance, on the carbs. where the fuel inlet "banjo" attaches and on the
gen. belt cover. He also used studs to attach the timing cover and
the oil sump. He drilled small holes (approx. 1/16") in the top of the
carbs above the slides. He would measure the height with a piece if
wire he carried in his toolkit and when he was done there were small
pegs to plug the holes. Relays for the horns and lights along with the
circuit breakers were mounted inside the right-side toolbox. There's probably
a few more details I've forgotten to mention. </FONT><FONT face=Arial
size=2>I've got pictures of this very nice red/white/green creation and will
post them as soon as I get time. Cheers,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Charlie</FONT></DIV>
<DIV> </DIV>
<DIV>----- Original Message ----- </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=-@msn.com href="mailto:mut-@msn.com">Allan</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=Loopf-@topica.com
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, December 20, 2001 2:42
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Generator Woes</DIV>
<DIV><BR></DIV><PRE>============================================================
* More effective email marketing is a click away! * Get
professional email tools to create professional campaigns.
Target mailings, deliver in HTML, and track your success.
Try Topica Email Publisher. Now FREE for 60 days!
<A href="http://click.topica.com/caaaeQ8b1dfltb2Luw3b/TopicaEmailPublisher">http://click.topica.com/caaaeQ8b1dfltb2Luw3b/TopicaEmailPublisher</A>
============================================================</PRE>
<DIV><FONT size=2>Hi</FONT></DIV>
<DIV><FONT size=2> I did the shim for
the front of the generator already. The mounting pads with the two bolt
holes had been machined away and the space filled with aluminum
barstock which was welded into position, the barstock has come loose
frome the welds. there is nothing holding the gen. bracket to the engine
anymore. I don't see a way to repair this that will last. that was why I was
looking for an alternative for mounting the generator.</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=p-@aol.com href="mailto:peha-@aol.com">Patrick Hayes</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=Loopf-@topica.com
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, December 19, 2001
7:20 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Generator Woes</DIV>
<DIV><BR></DIV><PRE>============================================================
Win 5 Great DVDs – “Shrek”, “The Matrix” plus 3 More!
ViDVD is the first multimedia DVD player to support CD-R/W,
MP3, digital photos, and Internet access. The next
generation DVD player is here!
<A href="http://click.topica.com/caaaeZJb1dfltb2OCoyb/Vialta">http://click.topica.com/caaaeZJb1dfltb2OCoyb/Vialta</A>
============================================================</PRE><FONT
face=arial,helvetica><FONT size=2>In a message dated 12/19/2001 2:41:54 PM
Pacific Standard Time, mut-@msn.com writes:<BR><BR><BR>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px solid; MARGIN-RIGHT: 0px"
TYPE="CITE">I just can't<BR>face having the engine down again to reweld
this with the chance of<BR>distorting the lifter
bores.</BLOCKQUOTE><BR><BR>So don't. I ran my 73 Eldorado for over
100,000 miles with a worn down generator support yoke casting.
Without the support at the front end of the generator, vibration will
quickly tear the generator bracket to pieces.<BR><BR>Just mount the
generator gently and measure or otherwise determine the amount of slop
between the generator and the casting. Now get a comparable piece of
brass of the same or slightly larger thickness and cut a shim to fit in
there. Some snipping and tapping will get it to fit into its
curve. If done well, you can have tabs to bend over and hold it in
place. The shim will securely take up the loose space and work for
maybe 50,000 miles. What more do you want? Let me know if you
want a picture and I'll try to draw one.<BR><BR>The big issue is on
reinstalling the generator and belt. If you make the belt too tight,
it will crush the brass shim quickly, allowing the generator to rock and
again break the mounting bracket or one of its mounting bolts. If
you make the belt too loose, it will flop and vibrate and set up some
motions which might accelerate crushing of the shim. The loopframe
belt should be just tight enough to not flop around and certainly NOT
taut. It should be nothing like a power steering or air conditioner
belt. Just snug.<BR><BR><BR>Patrick Hayes<BR>Fremont CA<BR>EV, EV,
SPII, V-65-C, Monza, SuperAlce<BR>MGNOC L-403</FONT> <PRE>============================================================
FREE SHIPPING on high quality apparel from Outer Banks!
Order by 12/31/01 for 30% OFF with this coupon code: PEACE
Outer Banks has had great styles for Men & Women since
1983:
<A href="http://click.topica.com/caaaeTCb1dfltb2OCoyg/OuterBanks">http://click.topica.com/caaaeTCb1dfltb2OCoyg/OuterBanks</A>
============================================================</PRE></BLOCKQUOTE></FONT><PRE>===================================================
A PRODUCTION SERVER AS EASY TO USE AS YOUR MAC.
You'll learn how Mac OS X Server can streamline your workflow,
provide centralized storage and simplify network administration.
<A href="http://click.topica.com/caaaeY9b1dfltb2Luw3g/AppleAcademy">http://click.topica.com/caaaeY9b1dfltb2Luw3g/AppleAcademy</A>
===================================================</PRE></BLOCKQUOTE><PRE>============================================================
The real heroes of the New York tragedy
are without a doubt the FIREFIGHTERS.
Forever Defending...Never Yielding Baseball Hats
<A href="http://click.topica.com/caaaeExb1dfltb2OCoyg/FDNYhats">http://click.topica.com/caaaeExb1dfltb2OCoyg/FDNYhats</A>
============================================================</PRE></BLOCKQUOTE>
</BODY></HTML>
------=_NextPart_000_001C_01C189C9.35153A60--