Subject: Re: huh?
Author: Tom Formberg
Date: Aug 14, 2001, 9:29 AM
Post ID: 1707864377
If I'm not mistaken if you have a 10 degree pulley
mark, the first mark you come to is the full advance
marking, but I'm recalling that 10 degrees is not the
correct advance, but more like 20 degrees advanced is.
I believe that other loops came with a pulley marked
20 that was marked off correctly. I was told to place
another mark on the pulley at 20 degrees to time the
bike at full advance. I also remember it is a little
difficult to get a direct line of sight on the marks
at full advance so be careful you aren't off a bit -
not that we all aren't off a bit anyway.
Regards,
Tom
'73 Eldorado
'83 SP/Hedingham
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/