Subject: Re: smokin
Author: Patrick Hayes
Date: Jul 10, 2001, 8:38 AM
Post ID: 1707435069
--part1_4f.e2213e0.287c7b41_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
In a message dated 7/10/01 7:09:09 AM Pacific Daylight Time, adk-@gte.net
writes:
| One other thing....check to be sure your choke cables aren't binding and staying open slightly. |
Actually, the way to check them is to First, remove the enrichener bodies to
inspect the rubber disk at the bottom of the plunger, and Second, after
installation, to insure that the cable has about 1/8" of slack at the
adjuster when in the off position. You can't see the enrichener bodies in
action. The only way to know they are seated is to have the cable go slack
at the adjuster.
Patrick Hayes
Fremont CA
--part1_4f.e2213e0.287c7b41_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 7/10/01 7:09:09 AM Pacific Daylight Time, adk-@gte.net
<BR>writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">One other thing....check to be sure your choke cables aren't binding and
<BR>staying open slightly.
<BR>
<BR></FONT><FONT COLOR="#000000" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0"></BLOCKQUOTE>
<BR></FONT><FONT COLOR="#000000" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>Actually, the way to check them is to First, remove the enrichener bodies to
<BR>inspect the rubber disk at the bottom of the plunger, and Second, after
<BR>installation, to insure that the cable has about 1/8" of slack at the
<BR>adjuster when in the off position. You can't see the enrichener bodies in
<BR>action. The only way to know they are seated is to have the cable go slack
<BR>at the adjuster.
<BR>
<BR>Patrick Hayes
<BR>Fremont CA</FONT></HTML>
--part1_4f.e2213e0.287c7b41_boundary--