Subject: RE: Found the coil - testing tach
Author: AJ Huff
Date: May 24, 2005, 2:18 PM
Post ID: 1718918057
Boy that took some dexterity, but still no luck. Thanks for your help. You
are doing a good job convincing me that the tach is bad.
At 04:33 PM 5/24/2005, you wrote:
| AJ, According to the wiring the tach gets: 12 volt on the black wiring when the ignition is turned on. 12 volt (interrupted by the points) on the blue/black side. Ground If I would do the testing I would connect the ground, put 12 volts on the black and then use 12 volt on the blue/black wire to check if the tach is moving. Gunnar |
AJ Huff
'71 Ambassador
Three Rivers, MI
MGNOC# 19917