Subject: Re: T 3 front end
Author: MGcoo-@aol.com
Date: Mar 9, 2005, 6:16 AM
Post ID: 1718515716
In a message dated 3/9/05 1:56:26 AM, tedwa-@hotmail.com writes:
| Can you put the t3 on the eldo and if you can what do need to make it fit !? |
Ted
The T-3 front forks can easily be put on a loopframe. You need the complete
front end with triple clamps, remove the lower head bearing & place a .1000"
spacer under the bearing, it will then bolt right up. The problem area is if
you want to keep the Eldo fender, I believe the fender braces to mount an Eldo
fender to these forks are very hard to come by. Also keep in mind that that the
T-3 forks will most likely need new dampers & springs to really make them
work as well as they should.
Ken
Asheville, NC