Subject: RE: wiring ideas????
Author: Bruce Giller
Date: Feb 21, 2005, 5:24 AM
Post ID: 1718427816
I've been using a chain ViseGrip
(http://www.coastaltool.com/cgi-bin/SoftCart.exe/clamps_vises/vise-grip/vgsp
.htm?L+coastest+mzvf1852ff9fca9f+1109068073) on those pesky head nuts. The
only thing to watch out for is clearance between the chain and the head
since the chain is wider than the nut.
Bruce
'72 Eldo
-----Original Message-----
From: Robert Hawkes [mailto:3haw-@bluefrog.biz]
Sent: Monday, February 21, 2005 9:13 AM
To: Loopfram-@topica.com
Subject: RE: wiring ideas????
Andy, I have this whole week off. Want me to come over with my spanner
wrenches and get those bad boys off there for you? Heat up those threads
and then squirt Blaster or Marvel oil on them and the heating and cooling
can move the oil through the threads some. Call me if you like and I'll
come down. The only other thing I have planned this week is to wire up a
new light on the side of the house. Already half done. Bob
-----Original Message-----
From: andy hill [mailto:alh-@adelphia.net]
Sent: Sunday, February 20, 2005 4:23 PM
To: Loopfram-@topica.com
Subject: wiring ideas????
as an aside- i have yet
ANOTHER V-700 motor in the shop, and the exhaust nuts are stuck, big
time. destroyed one of 'em already. used heat, punch, chisel, BFH, all
to no avail. sheesh.... feel like an fng. spring is a coming- need to
get these old mutha's done- appreciate any ideas!
an-d