Topica Loopframe_Guzzi Archive
 

Subject: RE: Headlight Relays question for Greg Field

Author: Greg Bender

Date: Feb 14, 2005, 11:56 AM

Post ID: 1718389593


I had one hooked up temporarily when I was investigating creating my own
electronic flasher unit using timer chip...I'm back to using the cheap
and dependable thermal flashers again with the 1156 running light/turn
signal configuration.

Rob Prins wrote:
 
More great info, I prefer the looks of the panel mountable socket over
the harness type.

By the way, just curious if anyone has a PC board anywhere on their
loop.

Rob

Greg Bender wrote:
 
I emailed Dan Prunuske about relay sockets for the smaller automotive
type micro relays, he provided this information to me:

Sockets are readily available from many sources, BUT I can't find any
that
will gang together with the ones on Guzzis. Almost all the sockets I
have
seen can be ganged together, but they all use a different system. If you



are planning to fashion your own mounting system,
http://www.waytekwire.com/carries Bosch sockets. These are great folks
to
deal with and their prices are decent. They have two versions: Bosch 3
334
485 045 (Waytek 75290) and Bosch 3 334 485 049 (Waytek 75292). The
former
is a panel mount and the latter is a PC board mount.

Cheers,
Dan

Regards,

Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender



Regards,

Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender

Entire thread: