Subject: RE: Need advice/opinions on scored cylinder wall
Author: Robert Hawkes
Date: Nov 1, 2004, 3:53 PM
Post ID: 1717804578
Mike Denver, the pistons need to be balanced within tenths of a gram of each
other. If you don't you won't have a smooth running machine. So, buy towh
pistons, my opinion. Bob Hawkes
-----Original Message-----
From: loopframe [mailto:mbe-@amwindow.com]
Sent: Monday, November 01, 2004 8:29 AM
To: Loopfram-@topica.com
Subject: RE: Need advice/opinions on scored cylinder wall
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Go on a Cruise for Free!
http://click.topica.com/caacOlEb1dfltb7ukc8a/PermissionData
-------------------------------------------------------------------
Thanks Greg! That's what I needed to know. Did the oil thing and yes the
compression went up. So I went the next step and took a look inside. That's
when I cleaned up and went to watch football. The groove will catch your
finger nail, it's not pretty. So I need to order a new jug and piston with
rings for just the one side. The other side doesn't need to be messed with,
right? I do still have the chrome jugs and I assume that you want to have
the same on both sides to keep the heat the same. Thanks again going to
contact mgcycle. Mike Denver
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Your Neighbors will envy your Garden when you get 100 bulbs on us
http://click.topica.com/caacOlwb1dfltb7ukc8f/PermissionData
-------------------------------------------------------------------