Subject: Re: v700 question
Author: andy hill
Date: Oct 7, 2004, 2:39 PM
Post ID: 1717662390
Ron-
yep, mine is. seat's exactly the same, otherwise [well, it doesn't say
'moto guzzi' accross the back, tho.]
andy
----- Original Message -----
From: "Ron Komoroski" <motres-@lynchburg.net>
To: "looperlist" <Loopfram-@topica.com>
Sent: Thursday, October 07, 2004 3:55 PM
Subject: v700 question
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Claim your Free Cruise
http://click.topica.com/caacIqTb1dfltb2Paqpa/PermissionData
-------------------------------------------------------------------
Loopers,
The V700 I'm working on has a full length seat. It bolts on w/the two 13mm
bolts that turn into welded on nuts in the bottom of the seat pan above the
tool boxes, and a bolt going thru the frame up under the nose. It has no
tabs at the rear to line up w/the tabs on the frame. Each of the rear
carrier mount tabs that point up from the rear frame top loop has a slotted,
square block of rubber fitted over it to rest on the frame tube & (I guess)
pad the seat pan. The rear carrier mount tabs fit up into slots in the seat
pan as on the Ambo & Eldo, but there is nothing to hold the rear down, is
this correct?
thanks,
Ron Komoroski
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is Gay Marriage a Civil Rights Issue? Click here and win.
http://click.topica.com/caacHM3b1dfltb2Paqpf/PermissionData
-------------------------------------------------------------------