Subject: Re: Carb or Other Problem - Really not sure?
Author: Jason Stallings
Date: May 17, 2004, 4:59 PM
Post ID: 1716784063
The carb slides and accelerator plungers are installed correctly. Any other
ideas?
Thanks Jason,
Did you put the square slide in backwards? Long end towards cylinder (I
think). This will cause an overly rich mixture.
Bruce
Greg Field wrote:
Another thing to look at is the plunger inside the accelerator pump. It's |
poorly.
GF On Monday, May 17, 2004, at 07:38 AM, Jason Stallings wrote: How do I know for sure if my problem is caused by bad valves? Is |
inspect?
Thanks - Jason After having some similar symptomss, I found that my left side valves and guides both needed replacing. I have 50,000 miles on an 850. It |
| starter relay now, before I will really know if that problem is |
| The cost for the valve job: $111.25 for the valves and guides, $30 |
| labor...Greg '74 LAPD 1. Left side plug fouls out all of the time. 2. When the engine is started and both cylinders are firing - I |
| on the throttle cable on the right side the engine revved as |
| tried the same thing on the left cylinder the motor bogs down and |
| rev up. What could be causing this? Thanks, |
===========================================================
Buy Stocks and Index Funds for just $4 No Account or
Investment Minimums and No Inactivity Fees Automatically
invest weekly or monthly and build your future.
http://click.topica.com/caaccMMb1dfltb4ClG5f/Sharebuilder
===========================================================