Topica Loopframe_Guzzi Archive


Subject: Re: 4 Speed Tranny Questions

Author: Greg Field

Date: Apr 19, 2003, 9:07 AM

Post ID: 1712683292


I respectfully disagree with this assessment.

I always add some tranny juice in the boot. I recently disassembled the
rear after 3.5 years and 71,000 miles. U-joint was perfect, as was the
carrier, except that it was now a loose fit on the u-joint shaft.

If that oil can get into the u-joint, you have a seal failure, in which
case centrifugal forces will sling the grease out and the bearing is
doomed anyway.

GF

On Saturday, April 19, 2003, at 08:36 AM, Hunter Jones wrote:

 
Either way oil in the boot is bad as it will wash the grease out of
the joint and also the carrier bearing. This will lead to premature
failure. Usually the bearing will be OK with repacking but the joint
is another story. Even so I saw that P67V7 had the parts to
rebuild a U-joint.

Entire thread: