Topica Loopframe_Guzzi Archive


Subject: RE: Storing Eldorado

Author: Fred Sahms

Date: Oct 15, 2002, 6:32 AM

Post ID: 1711208733


I have always found WD40 to just evaporate away. I'd use marine fogging
oil (aerosol) in the cylinders (and the tank, if you want to drain it).


Todd Nordwig wrote:
 Any problems with spraying WD40 in the cylinders?
Seems you'd get a better oil film with an aerosol as
opposed to just dropping some oil in and spinning the
engine. Anybody do this?


----- Original Message -----
From: "P67V7" <PAKu-@hotmail.com>
To: <Loopfram-@topica.com>
Sent: Monday, October 14, 2002 10:42 PM
Subject: Re: Storing Eldorado


 I drain the tank and let it dry for a few hours with the cap off then
spray
 WD40 inside, put the cap on.
Also, I remove the spark plugs, oil the cylinders down well with engine
oil,spin it over a few times and reinstall the plugs.
Paul

73 Eldo (motor in the frame!)
78 T3/949

Entire thread: