Topica Loopframe_Guzzi Archive


Subject: Re: Storing Eldorado

Author: Paul Linn

Date: Oct 14, 2002, 8:50 PM

Post ID: 1711206656


Oh yeh, forgot about the cylinder part. Did the same on the cylinders, but
poured some Marvel Mystery Oil in and put the plugs back after rotating by
hand. That way you don't get an oil bath on your walls. :)

Paul
Richmond, Va
73 Eldo custom project "Elvira" coming together slowly
76 T3 basket
----- Original Message -----
From: "P67V7" <PAKu-@hotmail.com>
To: <Loopfram-@topica.com>
Sent: Monday, October 14, 2002 11:42 PM
Subject: Re: Storing Eldorado


 I drain the tank and let it dry for a few hours with the cap off then
spray
 WD40 inside, put the cap on.
Also, I remove the spark plugs, oil the cylinders down well with engine
oil,spin it over a few times and reinstall the plugs.
Paul



_________________________________________________________________
Send and receive Hotmail on your mobile device:http://mobile.msn.com

Entire thread: