Subject: Re: Stainless fasteners for Rocker covers

Author: Bill Berry

Date: Aug 16, 2002, 2:14 PM

Post ID: 1710820776

I'm just pointing out the possible differences in the
options. YOU need
a dose of your own advice.
Zerhackermann wrote:

And I am offering other options. Try not to get your
panties in a wad
old timer. You need to lighten up.


-----Original Message-----
From: Jesse Open [mailto:Beaver-@comcast.net]
Sent: Friday, August 16, 2002 12:36 PM
To: Loopfram-@topica.com
Subject: RE: Stainless fasteners for Rocker covers


Did you check the price ? Heck the Chinese is "good
stuff" but not a a
buck a throw . I'm just passing these on at the same 42
cents apiece
they cost me. Trying to help folks get a better deal
than they would get

at a *DECENT* hardware store. Let alone some backwoods
rain forest joint

:-( .
Zerhackermann wrote:

Any *decent* hardware store sells the good stuff.


-----Original Message-----
From: Jesse Open [mailto:Beaver-@comcast.net]
Sent: Thursday, August 15, 2002 12:32 PM
To: Loopfram-@topica.com
Subject: RE: Stainless fasteners for Rocker covers


The hardware stores around here sell Chinese made 6mm

x 25mm stainless

for about $1 per screw or a bit oveer $16 a set .The

sets I have are

excellent industrial quality.
Crud plated are a LOT cheaper.

The key blanks are genuine OEM NIEMAN not Neuman .

Zerhackermann wrote:

Any decent hardware store (NOT home depot, etc) will

have the same

things. Moto-I also has them. The cost was roughly

the same. Just
take

the nasty old bolt with you and go hit the bins.

-----Original Message-----
From: Ross [mailto:ariel-@earthlink.net]
Sent: Wednesday, August 14, 2002 11:31 PM
To: Loopfram-@topica.com
Subject: Re: Stainless fasteners for Rocker covers


Jesse,
the same for my Ambo, after the others. Also, what

are you asking

for
the blanks? Please e-mail me off list. Regards, Ross

on 8/14/02
18:27,

Robert Hawkes at 3haw-@bluefrognet.net wrote:

Jesse,
If you have an extra set for my Ambo, let me know.

Bob

----- Original Message -----
From: Jesse Open <Beaver-@comcast.net>
To: <Loopfram-@topica.com>
Sent: Wednesday, August 14, 2002 6:16 PM
Subject: RE: Stainless fasteners for Rocker covers

Ian,
I have them for $3.50 per side. These are QUALITY

industrial

grade stainless socket head cap screws. Let me

know if you want

some.

I also have a few NEW ,GENUINE Neuman key blanks

for the tool

boxes and steering head. Ian Adkins wrote:
>Hey all,

I rememeber a while back there was someone

selling stainless

>rocker
cover fasteners.

I need two sets. Anyone have a set to sell or

can put me in

>touch with the right people.

Thanks...Ian






Is that the Single malt talking or just another

CHEAP WHINE ?

1972 LAPD Eldo
1977 T3
1993 Cal III Fuel Injection

Is that the Single malt talking or just another CHEAP

WHINE ?

1972 LAPD Eldo
1977 T3
1993 Cal III Fuel Injection

I take mine anywhere without worrying WITHOUT disc
brakes ! But then
again I never worried on ANY bike ,even the BRIT bikes
with LUCAS
electrics !And they NEVER let me down.At least since
1966 !

1969 V700 Euro
1972 Eldo LAPD
1993 Cal III Fuel Injection
2003 EV NEXT YEAR !!

I take mine anywhere without worrying WITHOUT disc
brakes ! But then
again I never worried on ANY bike ,even the BRIT bikes
with LUCAS
electrics !And they NEVER let me down.At least since 1966
!

1969 V700 Euro
1972 Eldo LAPD
1993 Cal III Fuel Injection
2003 EV NEXT YEAR !!