-----Original Message----- From: Jesse Open [mailto:Beaver-@comcast.net] Sent: Thursday, August 15, 2002 12:32 PM To: Loopfram-@topica.com Subject: RE: Stainless fasteners for Rocker covers
The hardware stores around here sell Chinese made 6mm x 25mm stainless for about $1 per screw or a bit oveer $16 a set .The sets I have are excellent industrial quality. Crud plated are a LOT cheaper.
The key blanks are genuine OEM NIEMAN not Neuman .
Zerhackermann wrote:
Any decent hardware store (NOT home depot, etc) will have the same things. Moto-I also has them. The cost was roughly the same. Just take
the nasty old bolt with you and go hit the bins.
-----Original Message----- From: Ross [mailto:ariel-@earthlink.net] Sent: Wednesday, August 14, 2002 11:31 PM To: Loopfram-@topica.com Subject: Re: Stainless fasteners for Rocker covers
Jesse, the same for my Ambo, after the others. Also, what are you asking for the blanks? Please e-mail me off list. Regards, Ross on 8/14/02 18:27,
Robert Hawkes at 3haw-@bluefrognet.net wrote:
Jesse, If you have an extra set for my Ambo, let me know. Bob ----- Original Message ----- From: Jesse Open <Beaver-@comcast.net> To: <Loopfram-@topica.com> Sent: Wednesday, August 14, 2002 6:16 PM Subject: RE: Stainless fasteners for Rocker covers
Ian, I have them for $3.50 per side. These are QUALITY industrial grade stainless socket head cap screws. Let me know if you want some.
I also have a few NEW ,GENUINE Neuman key blanks for the tool boxes and steering head. Ian Adkins wrote:
Hey all,
I rememeber a while back there was someone selling stainless rocker cover fasteners.
I need two sets. Anyone have a set to sell or can put me in touch with the right people.
Thanks...Ian
Is that the Single malt talking or just another CHEAP WHINE ?
1972 LAPD Eldo 1977 T3 1993 Cal III Fuel Injection
Is that the Single malt talking or just another CHEAP WHINE ?
1972 LAPD Eldo 1977 T3 1993 Cal III Fuel Injection