Subject: RE: Dyna Ig in ELDO
Author: Karl Kologiski
Date: Sep 1, 2001, 2:09 PM
Post ID: 1708083537
Thanks everybody for the info. I hope to have the bike up and running for the Florida Rally next month.
Karl and Jane Kologiski
Bird at The Wheel, Motorcycle Arts
St. Petersburg Florida
Visit our Website athttp://home1.gte.net/janemac/bird.html
For info on the 2001 Moto Guzzi Rally Visit the rally website at
http://home1.gte.net/janemac/guzzirally.html
-----Original Message-----
From: David Washburn [SMTP:dwash-@c4.com]
Sent: Saturday, September 01, 2001 1:26 PM
To: Loopfram-@topica.com
Subject: RE: Dyna Ig in ELDO
============================================================
An American Classic
There's a good reason why Reader's Digest has long been one
of America's favorite magazines. Find out why that's true
by trying a risk-free subscription now!
http://click.topica.com/caaac1Fb1dfltb1BgZXa/TopOffers
============================================================
Karl Kologiski wrote:
Does anyone have a copy of the wiring diagram for a Dyna 3 ignition system. I am dropping a square barrel 1000 in my 74 LAPD and the square barrel has a Dyna 3 and I need to connect it to the Eldo wiring harness. I dont want to fry the little black box. |
Everything is on the web Karl, everything. The Eldo harness has a
blue/black wire that supplies power to the single coil. Connect that to
one of your coils and make a jumper for coil #2. The most important
thing to remember is to get a perfect ground for the black box. I
connected it to a timing case bolt. Bad grounds kill Dynas dead due to
overheating. This webpage has the diagram you crave courtesy of the
Great Godfrey:
http://www.bayarea.net/~ramarren/motocycles/dynaIII/dynaIII-ib.html
Good luck,
David in NYC