Subject: RE: Muffler weirdness
Author: Pete Scheer
Date: Jul 9, 2001, 7:01 AM
Post ID: 1707419364
Z man
Yes I know. But a good comment anyway
Thanks
-----Original Message-----
From: Zerhackermann . [mailto:chopp-@hotmail.com]
Sent: Thursday, July 05, 2001 11:01 AM
To: Loopfram-@topica.com
Subject: RE: Muffler weirdness
============================================================
How much can you save on your favorite stuff?
With TopOffers, the sweet deals & super savings never stop.
http://click.topica.com/caaacgNb1dfltb2DJrHa/TopOffers
============================================================
You do know that there are left and right header pipes right? I mean one is
longer than the other on purpose.
| From: Pete Scheer <plsc-@tycoelectronics.com> Reply-To: Loopfram-@topica.com To: "'Loopfram-@topica.com'" <Loopfram-@topica.com> Subject: RE: Muffler weirdness Date: Wed, 4 Jul 2001 17:56:42 -0400 ============================================================ ~ Looking for a full-featured 401(k) plan? ~ ~ Success401k.Com is the answer for your growing business! ~ ~ Click below to learn more about an online 401(k) plan ~ http://click.topica.com/caaacz8b1dfltb2c9oVa/Citibank ============================================================ Dave, I'm not sure if this will help, but I had a similar experience recently. I am not sure what mufflers I have. Ian thinks MACs from a pic I sent him. There are no crossovers . In any case I replaced one head pipe ( left ) with a used one from a fellow looper. I found that the pipe was about 1 1/2 inch too long meaning it positioned the muffler too far behind the mounting bracket by 1 1/2 inch. I just didn't want to cut the pipe so I made a new bracket that fit between the muffler and the original bracket. Used a piece of card board as a template, then made the real bracket from 1/4 thick aluminum. I also wiped out a drill on what must be stainless Steel. sorry cant help you there. Good Luck Pete -----Original Message----- From: Rich Marchand [mailto:marc-@pwrtc.com] Sent: Wednesday, July 04, 2001 5:32 PM To: Loopfram-@topica.com Subject: Re: Muffler wierdness ============================================================ Learn over lunch. Get the developerWorks newsletter and enjoy tools, code, and tutorials, along with your sandwich. XML, Linux, Web services, Java -- and peanut butter! http://click.topica.com/caaacwJb1dfltb2DJrHa/developerWorks ============================================================ Dave, I purchased a set of Mac slashcuts about 2 months ago and had to do some cutting of the head pipes to make them line up with the mounting holes. Took some effort but was worth it as they look great,no cobbled brackets. Oh yeah they sound great,probably a little louder than the rusted out LaFranconis that were on it.....IF you go this route remember to measure twice and cut once. Dont't know about drilling stainless ,mebbe better drillbit<g> Rich Marchand 1980 BMW R100RT 1974 Moto Guzzi Eldorado MGNOC 17418 ----- Original Message ----- From: David Washburn <dwash-@c4.com> To: <Loopfram-@topica.com> Sent: Wednesday, July 04, 2001 3:08 PM Subject: Muffler wierdness
============================================================ How much can you save on your favorite stuff? With TopOffers, the sweet deals & super savings never stop. http://click.topica.com/caaab6jb1dfltb2c9oVf/TopOffers ============================================================ |
_________________________________________________________________
Get your FREE download of MSN Explorer athttp://explorer.msn.com