Subject: RE: Regulator part number
Author: Pete Scheer
Date: Jul 4, 2001, 2:44 PM
Post ID: 1707369391
Bob
I am looking at the shop manual. says 25 AMP in one table
another place titled Generator without regulator calls for 23 AMp at 2300
rpm.
last table refers to the regulator limiting current to the range of 28.5 to
30.5 AMP
Not sure what all this means. But there is no ref at all to 50 AMPS.
for what its worth
Pete
-----Original Message-----
From: Robert Hawkes [mailto:haw-@frontiernet.net]
Sent: Wednesday, July 04, 2001 5:30 PM
To: Loopfram-@topica.com
Subject: Re: Regulator part number
============================================================
Need to s-t-r-e-t-c-h your dollars?
Get more bang for your buck with cool savings, hot deals, &
free stuff.
http://click.topica.com/caaacgFb1dfltb2DJrHa/TopOffers
============================================================
Hey Pete,
Thanks a lot for the info. Will keep it for future reference. Just about to
head out to the shed to button everything up and see if she stays together.
Also, my generator is registering as putting out 50 Amps. Isn't that high
for a loop? I thought they were supposed to be at 25 Amps. Bob Hawkes
----- Original Message -----
From: Pete Scheer <plsc-@tycoelectronics.com>
To: <Loopfram-@topica.com>
Sent: Wednesday, July 04, 2001 5:12 PM
Subject: RE: Regulator part number
| ============================================================ Crazy for bargains? Go nuts with TopOffers where total bargain madness is normal! http://click.topica.com/caaacgEb1dfltb1FlG8a/TopOffers ============================================================ Bob and Dave O ( for the xref list) I had the side covers off and looked around the regulator I have. There |
| a part number on it 2161 12V N/P No other designation, the PO installed it and said it was from Ford. I've run mine over 1000 miles now and it seems to function fine. I believe I have the Marelli Gen. Glad to hear you got it fixed. Pete -----Original Message----- From: Robert Hawkes [mailto:haw-@frontiernet.net] Sent: Wednesday, July 04, 2001 8:54 AM To: Loopfram-@topica.com Subject: Re: Regulator ============================================================ WHY WASTE MONEY? If you are over 50, subscribe to the SeniorDiscounts.com newsletter and get tips on over 25,000 discounts nationwide. You've earned it, so take advantage: http://click.topica.com/caaaczob1dfltb2DJrHa/Senior ============================================================ Pete, No problem got it all sorted out yesterday. I did go to local auto parts store and they had a regulator that looked right that fit a 63 ford |
| only $20. But as luck would have it my problem turned out ot be a busted wire on the top of the generator, which I only noticed after taking tank |
| and looking around. All fixed for now and THANKS! Bob Hawkes ----- Original Message ----- From: Pete Scheer <plsc-@tycoelectronics.com> To: <Loopfram-@topica.com> Sent: Tuesday, July 03, 2001 9:36 PM Subject: RE: Regulator
|
============================================================ Stretch your dollars. Make George do double duty with amazing deals from TopOffers. http://click.topica.com/caaacgOb1dfltb2DJrHf/TopOffers ============================================================ |