Subject: RE: '74 eldo Police disk spacer
Author: scott grupe
Date: Aug 31, 2005, 7:13 AM
Post ID: 1719370327
Thats the correct dimensions for sure. I removed one off the other '74
eldo. axle.
I've eveidently LOST one someplace. So, Im gonna use the donor one and
make a new spacer to replace that one. So far I have a piece of Black
steel 1 inch pipe left over from plumbing my compressor. It fits perfect
around the axle and is same dia. wall thickness.
Anyone have a problem with using this as stock to machine a replacement
spacer?
scott
Greg Bender wrote:
Hi Scott,
Here is the info I've gathered:
http://www.thisoldtractor.com/gtbender/loopframe_frame.htm#disc_brake_information
scott grupe wrote:
More puzzle pieces. What exactly is the length of the spacer on the
outside, disk side of spacer on axle??
Seems i sent one out to be chromed and its 2.0 inches more lor less.
Appears to be at least 1/2 inch too long which does not allow for enough
axle thread for nut?
s
Regards,
Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender
Florida MGNOC website
http://www.thisoldtractor.com/fl_mgnoc
Minnesota MGNOC website
http://www.thisoldtractor.com/mn_mgnoc