Subject: RE: Hello!
Author: John Chicoine
Date: Aug 16, 2005, 1:47 PM
Post ID: 1719305895
I used a POR 15 kit on my V700 tank and would use it again. Make sure
the gas cap doesn't leak because the etching chemical will attack your
paint. You could also mask off the filler neck from the rest of the
tank as an added precausion.
John C.
-----Original Message-----
From: Ted Ward [mailto:ju-@astrocomma.com]
Sent: Tuesday, August 16, 2005 4:13 PM
To: Loopfram-@topica.com
Subject: Re: Hello!
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to
reduce wrinkles by 68% Click here to get your 30-day free supply.
http://click.topica.com/caadOvzb1dfltbN7eKTa/Nexiderm
-------------------------------------------------------------------
Wouldn't use tank sealer unless you are planning on repainting
or being VERY careful.
--- thomas halchuk <halc-@comcast.net> wrote:
| gas tank sealer - $50 |
Ted Ward
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caadOuab1dfltbN7eKTf/PCPowerScan
-------------------------------------------------------------------